🔊 Heavy Duty Soundbar Wall Mount - Mounting Dream MD5428: Adjustable TV Bracket for Sound Bars Up to 26.5 LBS, Extends 3.44”-6.06”, No-Slip Base Holder Review

really works! I made it the way I wanted it! 85" already hung TV. And didn't want to take it back down. But I was able to use a bolt/washer and nut on a hanger bracket and it fit so snugly under the TV. Happy shopping 👍🏾

An unexpected problem. Will not work with the Samsung Q70 Soundbar if you want to use the speaker mounting holes. The gap is slightly larger than the width of the bracket by an inch. The speaker's upward curve eliminates the use of a front hook or floor plate. You'll need to find another setting that covers the distance to the speaker mounting points. I think a 2 piece Sonos mount might help. Otherwise very good fit.

Instructions are easy to follow. Only the holes from the bracket to the TV did not match. Maybe 29/32 inches but I made sure the top screws were secure and the bottom screws were pointing down a bit to catch the TV threads. The soundbar arms are adjustable, and the Bose 700 soundbar leaves about 3/4 of an inch of clearance. The arm reaches as high as possible, only the up and down position of the soundbar mount is not adjustable. Enough space to securely hold my PS5 camera.

This mount was very easy to mount on a wall mounted TV. It attaches with the same screws as the wall bracket, so you'll have to detach the TV to mount it, which can be an issue with larger TVs (mine was a 40-inch set, so no big deal). The problem is that the soundbar itself isn't tethered or anything, just mounted on brackets. So if your TV is tilted at a steep angle, it may not hold the soundbar at all. Otherwise there are no complaints.

The product was easy to assemble even with poor quality instructions. The hardest part was choosing the right height to mount the soundbar bracket on the TV to create minimal clearance between the bottom of the TV and the soundbar itself. For reference, my TV model is Sony xbr85x950G and my soundbar is Sonos Arch. After the pole mount was attached and the soundbar placed on top, I had concerns about stability. It was the only soundbar mount I could find that could support the Arc's weight.

I don't know why I waited so long before installing the soundbar under the TV. Today, large TVs don't weigh as much as they used to, and wall-mounted systems can support the weight of a TV and more. So switch on the soundbar! I aligned the brackets to my existing TV mount and VOILA added new soundbar support. Very easy installation, anyone can figure it out. Now my soundbar sits close to the TV and sends the sound source directly to our ears instead of down. Now they appear as one component…

I have an older Samsung soundbar that doesn't have mounting screw holes on the back so needs support from underneath. It worked great. My only suggestion is to install it with the legs still on your TV (before you mount it) - put the legs on a pair of 2x4s etc so it's high enough to fit a soundbar underneath and the to find the right height. so your soundbar fits snugly against the bottom of your TV. To adjust the height you have to loosen the screws that attach the TV to the bracket and I…

Very strong bracket assembly. The assembly is not difficult, but a bit tedious. I have a Samsung TV and the speakers below protrude slightly from the back so there is a large gap for everything to fit through. If I had placed the soundbar on top it would have been a lot easier to install, but then the speaker would have been too high and I don't think it would have looked as pretty. None of the included screws were long enough and the screws I used on the TV mount weren't long enough after…