🔧 NANPU Compressed Regulator Piggyback AW3000 03D: Efficient Air Pressure Control for Improved Performance Review

I like the filter aspect, and the regulator is there and does not deviate from the target value. I have never been able to prevent air from leaking out of the pressure gauge/gauge thread. It was leaking somewhere past the pressure gauge and where it screws into the filter. Another problem is that when screwing the gauge into the filter housing, there is not enough room to use a wrench to really tighten the gauge threads that go into the housing. I had a different pressure gauge. I just bought a

Yes, it has problems. Instructions first. They're awful so just throw them away. The mount is flimsy, and quite flimsy for an ESC of this size. The mounting nut is plastic so don't worry or you might regret it. Cleanliness and camber is all you can get before damaging it. The auto drain hose is 3/8 inch OD, so be prepared if you don't want it splattering all over the place. Now the most important thing in my book: The pressure gauge is leaking. I've tried teflon tape, paste, pretty much…

I bought this to clean the air. I've tested it on 2 compressors, a large one with its own pressure setting (although it doesn't have a vapor separator) and a small one that hasn't been regulated before. It was nice to be able to adjust the pressure on the small one and see it work as desired. Good set. I used my own fittings. (You can buy a large vacuum compressor parts kit with hoses for about $10 from Home Depot - buy it because you need a bunch of QD nozzles and extra nozzles/hoses) as the…