Description of 📊 Enhanced Measurement Function of Network NF 8209 Tracker
[Network cable scanning] Three scan modes selectable: Digital model/ Analog mode/ PoE mode. [Cable continuity testing] Test physical status for STP, UTP lan cable. [Cable length measurement] Measure cable length and locate fault distance accurately for lan cable.The cable type is CAT5e,CAT6,CAT6a(STP&UTP). The test range must be 2.5m~200m. [PoE Testing & Port Flash] Test the information of PoE device, such as PoE voltage, power supply polarity, power supply mode. It can also identify which the type of PSE (at/af standard) If it is standard PoE device. If it is no-standard PoE device, it only display “non-standard”. Locate network port by the flashing port light on Hub / Switch. Available to 10M/100M/1000M Hub/ switch. [Non-contact voltage detecting] Detect AC voltage presence (50V-1000V). You can press the "Power/Set" button on the receiver, if the "NCV”indicator is light on, then you can use the receiver to detect AC voltage presence.