🔧 OEMTOOLS 22835 11mm Metric Drive Hex Bit Socket: Precise Hex Bit Socket for Efficient Mechanics Review

Summary: I really like these hard chrome bits that protect them from rust. Replacing a lost socket from the kit Pros: Good fit and finish Cons: None.

Works great with my brake pad assembly on my 2017 Dodge Durango RT. I don't know why Dodge chose 11mm. Most allen kits are not 11mm. I've searched all my local stores with no success. Went like clockwork.

I chose this when I needed to loosen caliper pins on new Dodge calipers as well as the occasional outside job. A good quality outlet that sits in your box and ready for those tasks.

Bought to replace the brakes on a 2012 Grand Cherokee. Luckily everything fitted perfectly and I was able to continue and finish the work. It worked as expected, good value, that's all I can ask for.

Do you need it when you want to change the desiccant cartridge in your smart fortwo Electric Drive high voltage battery or the oil in some John Deere tractors? Make sure you put it in that 'special place' so you can find it if you need it again in two years.

Bought this for a specific purpose. I wasn't planning on buying a set of hex bits to get a size. Note that for about 10x the price of 1 you can buy a large ratchet set in sizes you may never need. When I look at my set of 100+ heads, I realize that I actually only use about 6 of these pieces. For me, that's the size I need to dump the spare tire in my car. Instead of a 3/8" drive, I opted for a 1/2" drive. Because the torque wrench and pry bar I use to change tires are 1/2" drive. My percussion

Works as expected Delivery stinks. You can enter the street where my house is located from the west or from the south. I'm about 0.3 miles west and a mile south. The road was blocked on the west side about 100 meters from my house. Instead of going the other way, they delayed the delivery.

I needed this size to remove the Freebob body from the rear wheel of the bike for maintenance. Torques do not exceed 40-50 Nm, so there is no need to talk about durability. The tool appears to be of good quality and has worked great for what I have used it for. I don't know if it can handle up to 100 ft/lbs or torque, but for the price it's the perfect basic hand tool.

They fit the front brakes (calipers) on my 2017 Jeep Grand Cherokee so here it is. Most kits only come in 8mm, 10mm and 12mm so I found it odd that Jeep went with 11mm (needs to keep the tool guys happy). It fit perfectly and withstood the pressure. Initially I used my 10mm but wanted to make sure I re-tightened it with the 11mm. Also in other reviews 10mm might work in a pinch, but personally I'd rather have the right tool and not shoot anything (especially in a hard to reach area).