Header banner
Revain logoHome Page
oil compressor remeza sb4/s-100.lb30a, 100 l, 2.2 kw logo

Oil compressor Remeza SB4/S-100.LB30A, 100 l, 2.2 kW Review

11

·

Very good

Revainrating 4.5 out of 5  
Rating 
4.6
Automotive, 🚚 Heavy Duty & Commercial Vehicle Equipment, 🚛 Heavy Duty & Commercial Vehicles Parts, 🚚 Heavy Duty & Commercial Vehicle Equipment

View on AmazonView on ЯM

Media

(17)
img 1 attached to Oil compressor Remeza SB4/S-100.LB30A, 100 l, 2.2 kW
img 2 attached to Oil compressor Remeza SB4/S-100.LB30A, 100 l, 2.2 kW
img 3 attached to Oil compressor Remeza SB4/S-100.LB30A, 100 l, 2.2 kW
img 4 attached to Oil compressor Remeza SB4/S-100.LB30A, 100 l, 2.2 kW

Description of Oil compressor Remeza SB4/S-100.LB30A, 100 l, 2.2 kW

Compressor Remeza СБ4/С-100.LB30A is designed to compress air with a pressure value of 10 bar, after which it is transferred to a working pneumatic tool with a pressure of 8 bar. This Remeza compressor model is included in the category of professional equipment, but at the same time it has a relatively light weight and small dimensions, which makes it perfect for use in domestic conditions and in small production areas. The main purpose of this equipment is its use in service stations and car repair shops. At the same time, the SB4 / S-100.LB30A compressor is used for such work as tire inflation, household and car painting, purging drains, clogged hoses and various elements, as well as for working with various pneumatic tools - drills, wrenches and others. This model is characterized by convenience and safety of operation, which is ensured by the presence of a special casing located on the belt system, as well as the convenient location of all control and equipment controls.

Reviews

Global ratings 11
  • 5
    8
  • 4
    2
  • 3
    1
  • 2
    0
  • 1
    0

Type of review

Revainrating 5 out of 5

The perfect purchase for me, exactly what I was looking for!

From 0 bar to 10 pumps exactly 3 minutes 20 seconds Pros below: Pretty quiet - very noticeable compared to the ELITECH coaxial two-piston (it doesn't matter which company you compare with, they are all loud) The balloon is painted with dignity, nothing rattles or spills inside it, the grate on the belt does not rattle. Everything is fixed and tight. Screwed the wheels, plugged it in - ready to go. Some cons: A small, but still a drawback in my opinion - one quick release for air outlet, it…

Revainrating 5 out of 5

Excellent quality, absolutely not expected for such a price.

April 2022. Price tag 30.9 Workhorse. The working device gives ten. They wrote a lot about a bad restart - they didn’t encounter it! The inconvenient location of the pressure gauges, for us, it is necessary to redo it, we have already bought an anaerobic sealant. One quick-release (moreover, the metal-plastic one is still working. It comes with oil in the compressor. And one more thing - the plastic cut-off tube that goes to the pressure switch is embarrassing. Apparently, like all normal…

Pros
  • Service. Maintainability. Pressure. Price tag (relatively))).
Cons
  • Especially not.

Revainrating 4 out of 5

A good balance of price/quality, recommend it.

Bought and works. Works quite quietly in the next room. Took under the garage paint. The spray gun with a flow rate of 270 liters per minute pulls well. It even has time to turn off periodically. After a few hours of work began to poison the oil from under the heads. It lasted a little, for a couple of months everything is fine.

Pros
  • Seems to be reliable. Let's see.
Cons
  • Price

Revainrating 3 out of 5

The average product, you can find a better one.

If you take a better look at the details and the quality of reliability and assembly, you can clearly see that they are trying to sell us low-quality products under the brand name of a famous brand. This compressor is produced at a Chinese factory, in the same place where the Fiac brand and the GARAGE brand are produced. Different pros: I just didn’t notice what the advantages of a 100% Chinese compressor could be. Has some cons: This model has been used for more than a year, there is only one…

Revainrating 4 out of 5

I'm happy with it, the price and the quality, I recommend to buy it.

I think that the Belarusian hand-assed engineers from the Remez plant, arranged by pull, absolutely do not work out their salaries and lead the plant to the sludge of production, stupidly licking off old technologies. Top selling compressor and red internet from improvement forums. Under the cover of the pressure switch there is a performance adjustment bolt, for example, to cut down at 8 and start at 6 atm. By the way, the voltage after starting, as the receiver fills up, gradually drops to…

Pros
  • Build quality, painting, brutally clumsy-chopped, cast-iron head, rubber wheels and pillow, good pulley protection, not a short power cord, 3 passports for everything, with all checks and acceptances . . , not very hot, can be installed from two sides with a powerful air line
Cons
  • At the start, it sags the network in the garage from 240v to 153v. The factory starts only completely empty, although an easy start valve (absolutely non-spontaneous) has already been installed. With a full receiver of any pressure, it does not start at all, it does not push through the check valve, I immediately turn it off. According to the declared 2.2kW, somewhere everything is 3. The starting current is 5 times higher . . The result of such performance is all at the maximum. Now the main thing is how to start? We unscrew the easy start valve from the brass tee and in its place we unscrew the brass fitting 1/4 thread with a 12mm nipple, put a 1.5m oxygen hose on the fitting, heal with a clamp, on the other end the same fitting, which must be screwed into an empty 5l acid fire extinguisher (in the fire extinguisher grinder flush with the edge of the cylinder, cut off the tap and cut the taper thread m1/4 with a tap for a 1/4 fitting and unscrew the fitting into the fire extinguisher on the fumka, put on the other end of the hose with a clamp and go ahead, the compressor works at any start and pressure. . . It didn’t help, it squanders, I don’t see the point in stabilizers either, the additional receiver helped. Help everyone . .

Revainrating 5 out of 5

The quality is at the highest level, be sure to try it.

With its pros: In our specification for the post, only this brand of compressors is registered, only they have a passport for the receiver with a test report. With its cons: The assembly unit is not a cheap pleasure when repairing such a compressor

Revainrating 5 out of 5

The quality exceeds all expectations, I recommend to buy.

After a couple of first days of use, it is necessary to draw the bolts in the cylinder heads. If not done, it may squeeze out the gasket over time. Keep filters clean and change oil once a year

Pros
  • Reliability and optimal price
Cons
  • If maintenance is done on time, there will be no problems.

Revainrating 5 out of 5

Very pleased with this purchase, will recommend it to everyone!

A good network and oil change according to the regulations with an interval of 5 minutes of work and 5 minutes of rest is enough and you will be happy. I do not recommend taking it to garages with unstable voltage (the line length is more than 100m from the transformer and the power is limited to 15kW), the stabilizer will not save you. I will pass on all my advice so that you will not be disappointed like me after the purchase. All the best

Pros
  • Powerful. Reliable. The receiver is really 100l not like the Chinese.
Cons
  • Large starting currents. You need circuit breakers from 63A, a stable network of 230V or a stabilizer from 12 kW and still a good network. Starting current is about 80A. The network loads significantly. Great vibration and noise. Requires a separate power outlet with copper from 2.5 squares. Do not work through an extension cord with a small cross section

Revainrating 5 out of 5

Everything in the product suited me, the price is generally perfect.

He got me a lot boo. No, VERY STRONG BU. Before me, it was used by a team of builders in order to plaster walls. No one spared or pitied him. In general, when they gave it to me (yes, I didn’t buy it), it was painful to watch. Made an audit, cleaned, painted. He pulls a pneumospinner and a pneumochisel into the lung. Perfect for my garage use. I tried to paint, painted the garage door, an hour, without a break. He's on the drum. Doesn't overheat. Receiver for 100l, you can paint a passenger…

Pros
  • Reliability, relatively quiet operation, build quality
Cons
  • Not found at all