Header banner
Revain logoHome Page
oil fuel air water pressure transducer sensor for 1/8"npt thread with 1/8"-27 npt and 30psi dc 5v transmitter logo

Oil Fuel Air Water Pressure Transducer Sensor For 1/8"NPT Thread With 1/8"-27 NPT And 30PSI DC 5V Transmitter Review

7

·

Poor

Revainrating 2.5 out of 5  
Rating 
2.3
🧱 Threaded Rods & Studs, 🔩 Fasteners

View on AmazonView on ЯM

Media

(4)
img 1 attached to Oil Fuel Air Water Pressure Transducer Sensor For 1/8"NPT Thread With 1/8"-27 NPT And 30PSI DC 5V Transmitter
img 2 attached to Oil Fuel Air Water Pressure Transducer Sensor For 1/8"NPT Thread With 1/8"-27 NPT And 30PSI DC 5V Transmitter
img 3 attached to Oil Fuel Air Water Pressure Transducer Sensor For 1/8"NPT Thread With 1/8"-27 NPT And 30PSI DC 5V Transmitter
img 4 attached to Oil Fuel Air Water Pressure Transducer Sensor For 1/8"NPT Thread With 1/8"-27 NPT And 30PSI DC 5V Transmitter

Photos by authors

(1)
img 5 attached to Oil Fuel Air Water Pressure Transducer Sensor For 1/8"NPT Thread With 1/8"-27 NPT And 30PSI DC 5V Transmitter

Details

MaterialStainless Steel
Thread CoverageFully Threaded
Exterior FinishStainless Steel
Fastener MaterialStainless Steel
Item Weight0.04 Kilograms

Description of Oil Fuel Air Water Pressure Transducer Sensor For 1/8"NPT Thread With 1/8"-27 NPT And 30PSI DC 5V Transmitter

Upgarde Pressure Transducer: This Pressure Sender is an advance pressure transducer than traditional mechanical pressure transducer. Small Error Offers High Accurate: ±2%FS small output error, including nonlinear, hysteresis error and repeatability, full temperature range. Small Size Provides Convenient Operation: Light weight and small size, convenient to install and operate. Widely Applications: This Transmitter Sensor has widely applications ,which works for oil, fuel, diesel, gas, water, air pressure, can be used in oil tank, gas tank, diesel tank etc. Protetcion Function: It has complete surge voltage protection function

Reviews

Global ratings 7
  • 5
    2
  • 4
    0
  • 3
    0
  • 2
    1
  • 1
    4

Type of review

Revainrating 5 out of 5

Looks well made and has acceptable accuracy

So far I have only tested this item at two pressures. At 0 psig I get 0.50 V, which is the expected output with no load. At 98 psig, as observed on a 0-120 psig dial gauge of unknown accuracy, I get 3.07 V, which corresponds to 96.4 psig. That is within the rated accuracy of +/-2% FS, which is 3 psi. The 150 PSI etching on the body is well formed and easy to read, the finish on the body is free of blemishes and the pigtail connector is made of a plastic that is flexible and tough enough to…

Pros
  • Reads the pressure on my accuair ride control suspension when the original failed, seems to be accurate
Cons
  • Worked perfectly for a hour then quit

Revainrating 2 out of 5

Not Very good for engine testing.

Its slow to activate,but when running it produces a good signal.Baseline it starts at .5 volts. it has mostly NO vacuum signal . voltage drops to .25 volts at 19 in.It did not perform as I expected.

Pros
  • The sensor is made from high-quality materials, ensuring durability and longevity even in extreme conditions
Cons
  • The size of the sensor may make it unsuitable for some applications

Revainrating 5 out of 5

Can't beat this thing for the money!

This thing works awesome for the price! I am using it to monitor fuel pressure through my data logger, works beautifully!

Pros
  • With its high level of accuracy and reliability, this sensor can help prevent downtime, reduce waste, and improve efficiency in a variety of industries
Cons
  • May be more expensive than other pressure sensors with similar capabilities

Revainrating 1 out of 5

Not accurate! on my review.

I'm using this on a turbo LS. Installation was straightforward. Values in TunerStudio are correct. Startup said 50 psi, mechanical gauge said 58. Ok a difference of 8. Maybe its my values I thought.Went out for a drive, it would gradually drop to 30 and stay there. No way, right? Well I bought an AEM 150psi transducer and an Aeromotive mechanical gauge. I found out my gauge was wrong, it was 50 psi, not 58. Then I found out this cheapie transducer was also wrong. Fuel pressure while driving was

Pros
  • With a pressure range of up to 30 PSI, this sensor is ideal for use in high-pressure environments
Cons
  • The 1/8"-27 NPT threading may be too small for some applications

Revainrating 1 out of 5

Does not work. good for me

I ordered this device to monitor output pressure of a pump running between 30 to 50 PSI. That does not matter. I could not get the device to work. It's output voltage is a constant 4.9 when run on a 5.1 supply. This reading holds true even on a bench hooked to a 100psi air compressor. I even tested to see if this was a constant current device and that out put did not change by more than one milliamp across the pressure range.

Pros
  • Protetcion Function: It has complete surge voltage protection function
Cons
  • Not suitable for use with non-1/8" NPT threads

Revainrating 1 out of 5

Poor Reliability on my review.

This pressure sensor worked great. for about four months and then failed. Also the "stainless steel" housing did not hold up very well (see picture of four month old sensor). To be fair, I do live near the ocean and several other items that make the stainless steel claim have also quickly rusted.

Pros
  • The sensor is easy to integrate with existing control systems, allowing for seamless integration into existing workflows
Cons
  • May require additional accessories for installation and operation

Revainrating 1 out of 5

Terrible reliability.

Quit working after 1 month. 3 days after the return period expired. I will try to contact the company to see what they can do and it just my review accordingly.

Pros
  • Used it to get fuel pressure back when my autometer one failed.
Cons
  • Product didn't work, should have had instructions with it