🔪 Olson AllPro 3 TPI 2 Inch APG72672 Review

This was supposed to be a saw blade and for that purpose was a disappointment. The cuts were ok but I needed a cut and this isn't it.

Husband says he is happy with it and cuts well. This is a great review of him because in general he is an irritable guy. So a 5 star rating from him is like a 10 star rating from ordinary people.

The first time I used this disc I went through 2" Live Oak. The blade went right through. I've used Bosch discs before and this Olson -Scheibe blasted them far, not even a fair comparison.

Great blade. I installed it on my 10" WEN sawmill with great results. Easily cut multiple 6" mahogany planks. There were some drift issues with the standard canvas, but not this one.

This blade is a little more expensive than the cheaper ones but works much better. Aggressive teeth, very sharp. Cuts through 2" old oak like a walnut. Weld is well finished and smooth. No problems. Fits perfectly on my Shopsmith band saw. I expect lots of good use from it.

This blade made me think my 10" W bandsaw could make good, straight cuts. After trying to set up the saw and changing around 8 different blades, I came to the conclusion that to get good results from the saw you need to invest in a good and more expensive blade. All other inexpensive saw blades did not work on my saw. The cuts were pretty awful I thought I'd need another saw but I needed a good disc and now I seem to have one!

I bought this bandsaw used - LIKE NEW for a few dollars less. But when I opened it I was like WTF? The blade was not welded together. I guess non-welded band saws aren't in high demand so I was really confused by what I saw. I just hope Revain doesn't try to resell this blade as USED_LIKE NEW.

This blade convinced me that my 10" W Bandsaw could make quality, straight cuts. After trying to set up the saw and changing around 8 different blades, I came to the conclusion that to get good results from the saw you need to invest in a good and more expensive blade. All other budget saw blades have not worked on my saw. The cuts were pretty awful, thought I'd need a different saw, but I needed a good blade and now I have one!

I have a 10 inch Vein 2 speed band saw. The standard blade, 6 tpi, is sharp and good for trimming, but even after hours of adjustment, it still went everywhere on long cuts. I started making my own turning blanks out of fallen trees and needed something a little more grippy. This blade is amazing! Cuts fast and straight. Yes 3tpi makes a rough cut but I turn wood on a lathe so I don't care. Tried on a long piece of oak 2x4, sawn in half. Wow, it goes straight and never slows down the saw…