🔪 Olson APG77105-0.025-105 Inch Blade Review

I have a 14 inch Delta band saw with a 6 inch extension. I made the mistake of buying a 3/4 inch saw blade when buying a band saw. All my reading and experience since then has convinced me that a saw cannot handle such a wide blade. I couldn't get the 3/4" saw blade to move properly on both wheels at the same time, probably due to saw frame over-tension. I've bought Olson 5/8" and 1/2" blades and the 5/8" blade works great too. I haven't tried the 1/2" blade but expect the same result.

I have a Grizzly G0555LX with a 6" saw attachment. It is used almost exclusively for trimming walnut, maple and oak to size used from 5" to 7". Due to the strength of the 6" riser block, I can't use a 3/4" blade on it because the top block doesn't bend. I almost always have Timber Wolf 1/2" 3TPI blades with success, but this blade strikes the sweet spot between the more expensive TW and useless 3/4" blades. It may or may not stay sharp for that long (I wasn't actually expecting BF), but it cuts

I bought this blade from Revain for trimming wood. I often need 1/4" thick pieces of wood and am tired of planing 3/4" to 1/4" because I know that two-thirds of what you just planed (and paid for ), go in the trash.. Using this resawing disc will help maximize the amount of wood in your shop. The blade works well except I was expecting a slightly smoother cut wood surface. It may have been the wrong feed rate on my part. Especially since the saw is new and I still have to get used to it.One…