📐 Dimensionally Accurate Orange Filament Printer Review

👉【Less Odor, Less Warping】NOVAMAKER Orange ABS filament is made with a specialty bulk-polymerized ABS resin, which has significantly lower volatile content compared to traditional ABS resins.ABS is 3D printed at 220°C to 250°C , it is advisable to use a heated printing bed and an enclosed build space to control the cooling of this material and prevent warping. 👉【Strong and Durable ABS Filaments】3D printed parts made with ABS filament tend to be more flexible and less‘brittle'than those made with PLA filament.In ABS filament can endure heat, pressure and stress like no other home 3D printer material,making it a great choice for‘wear and tear’ prints. 👉【High Temperature Resistance】ABS filament is more durable than PLA because of its high resistance to heat. Thanks to a comparatively high glass transition temperature, it takes a lot more heat for ABS to reach that point than for PLA. That’s what makes it better suited for objects that remain in the sun. 👉【Dimensional Accuracy & Consistency】This 1.75mm diameter ABS filament has been made with strict production standards, so NOVAMAKER can assure that you that its size remains consistent all throughout.And solves the problem of printing interruption caused by the knotting of the filament.Remember to pass the 3d printer filament through the fixing hole after use to avoid tangling. 👉【Vacuum Packing】Complete drying for 24 hours before packaging.NOVAMAKER use vacuum-sealed packaging bag for packaging 3d printer filament to keep the humidity percentage at a minimum and controlled. To avoid clogging of the nozzles and bubbling.