Patriot Memory VIPER STEEL 16GB (8GB x 2) DDR4 3200MHz DIMM CL16 PVS416G320C6K Review

Everything is working. The only point, before buying, I didn’t look at how much the motherboard I have, and as a result, the RAM does not work to its full potential. And so in general, everything is fire!

Overclocked without problems to 3533 with 16-18-19-19-36, voltage 1.36 Motherboard: Asus TUF B450M-PRO GAMING Proc: Ryzen 5-2600X More than satisfied with the purchase!

Some pros: 1. I got Hynix chips 2. Declared 3200Mhz, just on them it started 3. Radiator, on the old PC the chips were very hot, it felt like about 40-50 degrees Has cons: 1. Unfortunately, I couldn’t raise it above 3200Mhz, maybe the motherboard can’t?

The stock frequency is 2666, on the factory overclocking profile 3200 16-20-20-40 it works stably, all tests pass the norms, on the Ryzen 5 1600x and the Asus Prime 370x motherboard above 3200, it is no longer stable. But in general, I left a good impression, especially with a price tag of 4k for 2x 8GB, the prices from aliexpress are direct, for some kind of crash ballistics and possibly scorched :)

Bought for assembly on Ryzen 7 1700. Mother ASRock A320M-DVS R4.0, With stock BIOS 1.90, it did not work at all correctly. When installing BIOS 22022, it became completely adequately detected and the profile was set to XMP in one click. Reading, writing, delays - everything is at a decent level, especially for memory at such a price. I didn’t drive the memory, although it’s probably possible, there are frequencies in the BIOS up to 4000, apparently you can stick cool memory whales there, but…

I bought it for a computer, where there were already 2 bars from another manufacturer. Together they work very well and no problems. The speed of 3200 is excellent, I advise everyone.

Perhaps the problem is not in the memory itself, but in the implementation of the BIOS on my motherboard or the 2nd generation of Ryzen. In a bundle of Ryzen 7 2700x + Asrock B450M Pro4, the maximum at which it was possible to run it is 3000 MHz with a voltage increase to 1.4V, although according to XMP it should work at 3200 MHz at a voltage of 1.35V. I do not exclude that on the 3rd generation of ryzens or on a board with a more advanced chipset, it will work in normal mode or even overclock.

Carefully check the manufacturer of the chips, these strips come across on nan chips! Which cannot even take the declared frequency, not to mention overclocking, which is no less important with AMD processors

Hiniks chips, mom Asrok B550, when, after assembling the block, it dawned that the memory frequency was 2133, this was something wrong, I started to figure it out, well . I figured it out. It would be cool if the manufacturer somehow mentioned that it would be necessary to shaman. As it is written in XMP, it worked. 3200, 1620222022.36, 1.35 volts. I didn’t drive, it’s from the evil one. I was surprised that in stress tests, the temperature of the RAM could not rise above 33 degrees, and was

Has some pros: good solid memory on hynix chips, on ryzen 7 2700 took 3400 frequency Different cons: The box was opened, there were traces of use, apparently someone tried to look for other memory chips

It is not clear where to shove it now. Collected a black computer. Prices fluctuate as usual. I took it for 4200, now it's already 4700, tomorrow it will cost 5k. In the characteristics of the goods, in the "product card" I did not find any information that the color may differ from the original. The return will be delayed for another week (now it is a day off) just kaekaef. March 19, 23 I put 5 stars. Top , not visible green, works 100 out of 100