Pccooler SilentPro Universal EasySET Compatible Review

If you have an AMD processor, then you will have to buy an adapter for a socket, the kit comes only for Intel. In the presence of straight arms, it is put quite comfortably. When I change the cooling, I always take the motherboard out of the case: this is the rule. Wrinkling with a bulky tower inside the case is such a pleasure.

Great cooler. I took it under cooling R5 2600 in overclocking to 3.9 Ghz. In stress tests, it copes with temperature without problems (temperature around 80C). The cooler has a very nice appearance. The fan is very quiet. In order to have harmony in the system unit, you can buy a few more fans by finding them by searching for PCCooler CORONA BLUE (RED, WHITE, GREEN). There is also a version of this cooler labeled PCcooler GI-X6B - it differs only in painted fins (which are almost invisible) and

The fastening is terribly tight, there is a risk of damaging the board. Load temperature r5 5500 85-86 degrees. Replacing with id cooling 224xts solved the problem. Moreover, with this cooler, the temperature reaches 85 in 30 seconds, with id cooling the temperature rises 3 times more slowly to 72-73 degrees. It seems to be 5 tubes, but it cools worse than a 3-tube one.

I took for xeon x3470, without overclocking in idle time, the temperature is 33-35 degrees at room temperature 25-26 degrees. In games, the maximum heats up to 56-63 degrees. The kit comes with a good thermal paste (1 gram), which is enough for several times. I have been using it for about two weeks, and have never regretted buying it, but everything is too big for my case (acer aspire m3910) when the lid is closed, it rests against it.

During installation, I encountered some of the most disgusting mounts that I had to work with. To properly fix the radiator, you need to either bend the "swing" with fasteners, or by making an effort to break the board. None of these options work for me. I think that the money went nowhere, because. after an hour of diligent attempts, I installed the old Deepcool assassin II. This cooling has not been installed, I'll try to return the money. If it does not work out, then I will look for normal…

The cooler will certainly cope with the TDP of the processor 105 watts but at the limit. Because of this 4 stars. But it looks very stylish. Got pros: 1. Stylish cooler, sooo quiet 2. Heat is distributed completely throughout the radiator Cons below: 1. It is extremely difficult to put on, on am4, you can bend the board, but if you are not a blogger and you do not need to take off and put on the tower a hundred times a day, then you can put it on neatly 1 time. 2. real TDP is not more than 95…

Good cooler for your money. Stands on Ryzen 7 2700X, copes without problems. The only, not critical minus is the noise of the fan, although it is solved by replacing it, but I don’t want to lose the stylish backlight along the fan contour))))

Has some pros: Dissipated power, normal appearance, silence at low speeds. Its cons: Terrible rumble at speeds above the minimum. replaced in the store (dns), and the second is the same. in a quiet sistemnik directly horror. I do not advise

Can't cool i5 9600kf when overclocked. Works well in stock. Just a cooler, just a radiator, a normal solution for your money.

Its pros: The radiator itself is OK for its price, it removes 140 watts at a temperature of 85, taking into account a good flow in the curpus. With its cons: Ordered black, arrived grey. Also, the turntable at 1200 rpm is audible, vibration is audible, at a maximum of 1800 it is already very audible, changed to Arctic p12.

put on i7-6700 Initially it was Deepcool GAMMA ARCHER PRO put this cooler and temperatures dropped ~20 screenshots attached

Yes, he does not have 5 pipes, but 3 full-fledged and 2 0.75 of a full-fledged one, for a total of 4.5 pipes. But, you do not forget about the cost and the size of the radiator. According to my results in using this product: I had a Zalman CNPS5X Performa, 38 degrees in idle and 78 degrees in a stress test at 80% rpm and noise (at 100% howl like an airplane). It became 34 degrees in idle and 74 degrees in a stress test at 70% rpm. At 100%, it does not howl, but it simply becomes too audible…

Pros below: I already use one and want to buy a second one. Convenient mounts Its cons: The fact that I have not bought it yet, but I can write a review about a product that has not yet been purchased

Included is a syringe paste (heat removal copes). Attached to the ASRock z390m pro4 board without any problems. On the Aida test, stress withstood a maximum of 60 degrees Bought in December 19 for 1400r.

Bought a new build. It has been working with a bang for a month now, it calmly cools the xeon 2670 v3 processor, of course, it hasn’t overclocked the percentage yet, but this killer will be for him and others like him with prosperity

Its pros: Price, appearance and location of heat pipes (close to the process) Got cons: The quality of the backlight LEDs, the noise level of the cooler.

Before that, I installed processors and coolers only once. The responses scared me. Everything worked out. 1. unscrewed the mounting screws on the motherboard as much as possible; 2. hooked the cooler latches to the fasteners; 3. tightened the screws on the motherboard. In the process, I was helped by 2 teenagers and my wife (one assistant would be enough).

I read the reviews, it seems to be a normal cooler, and it’s even enough for my fz 8300 with overclocking. You can’t install it yourself! Watch the video on installing this cooler, You need to unscrew the socket.

Pros below: Cools overclocked, hot evil from 2022 AMD Phenom II X6 1605T 4.1GHz perfectly and comes with pretty good thermal paste. Cons below: You will have to tinker with the installation on the AM3 socket

With its pros: At 1000 rpm it is almost inaudible, at 1400 it already starts to make noise. Some cons: Difficult to install. But there is a trick, unscrew the screws on the motherboard.