Powerbuilt (940756) 4500 PSI Heavy Duty Lever Style Grease Gun: Unleash Maximum Power for Extreme Greasing Tasks Review

Works great! The only issue I have is that sometimes it is difficult to remove the Zerk fittings which is why I only got 4 stars. Otherwise no problems, it's easy to fill up and works as it should.

Very well built and easy to use. I especially like the release valve that makes it easy to pop in a new tube of lube. It was perhaps the first grease gun I've used that hasn't broken apart and squirted a tube of grease all over the place.

Like all grease guns, it drips when the grease comes off even high-quality materials. (?). I do like the pump handle though - much more comfortable for one handed use than the long handle on the side which is almost impossible to pump with one hand while holding the nozzle by the mirror.

Works great with synthetic lube. If this is your first grease gun I would recommend reading the instructions. Air deflation is a must but works very well, has solid construction and good grip. I use it on: - ball joints - tie rods - tension arm - bipod arm - universal joints (needle mount required)

Received today. The thread for the head to the barrel is very imprecise. The threads of the head/barrel were leaking grease, so I removed the head, wrapped Teflon tape around the threads of the barrel and screwed the head back on (very carefully). Grease still comes out, but not much. Twice a year I have to lubricate the wheel bearings of my caravan. I'm not sure it can handle even this light work. Keep in mind.

This is my husband's review. "I have a couple of grease guns and for some reason, despite good instructions, I always find them difficult to use properly. amateur stuff. With this gun, my first attempt was an instant success and nothing has gone wrong since. The threaded connector allows you to loosen it before removing it from the mirror, eliminating the need to pull on your connectors to remove the tool. I know any pro will shake their head and any grease gun works well in the right hands…

This is pure garbage! First I bought 6 pieces. The first one I tried to use I spent trying to get it to work. This works when taking lube from a bucket, but not when trying to load a lube cartridge. The instructions indicate that the gun will work correctly, but it doesn't. And yes, I know which way the conical piston needs to be pointing. The problem is that the plastic washer between the spring and the rubber plunger is too wide and will stretch the rubber plunger enough to fit snugly in the…