Primeswift Microwave Door Interlock Switch W10727360 (3 Terminal) 🔌 & WB24X830 & WB24X829 - Replacement for SZM-V16-FC-61, SZM-V16-FD-62, SZM-V16-FA-63 Review

Easy replacement, depends on how comfortable you are with some off-microwave plates and plastic lids. Didn't take long

I replaced the switches a few weeks ago and seems to have solved the problem. WARNING: Pay special attention to the pins on the switches as they are all different and it is important to position them correctly. NO, NC.

Our microwave stopped working properly with a message to close the door after it was closed. I bought this kit and replaced all three switches at once. The factory switches fell apart when I took them off, so I was happy to replace them all at once. Now works like a champ!

Don't ask me why our Frigidaire microwave oven has 3 different door sensor switch models but they do. There are decent replacement parts, the 3 pin switch is great, the other 2 connections were looser than I would have liked, but the locking bushings kept everything in place (hence the -1 star). Do yourself a favor and get an idea of how everything connects to all three existing switches before unplugging anything, which makes reassembly that much easier.

My microwave didn't realize the door was always closed. It wasn't working and kept saying open/close the door. It has been fixed. I tried replacing just the lower derailleur (which worked for a while), but I had to replace all three. I would recommend doing it the first time. This is easy to fix. The three screws in the top vent cover and fairing on the right simply slide up. You will need a torx bit to remove the screws holding the real switches in place. This package was exactly what I had…

Bought all 3 fuses because they were cheap and wasn't sure which if any blew the 20A fuse every time the door was opened while the mic was working. GE microphone via JVM3160RF5SS oven. There are tons of videos on YouTube on how to get to the fuse and door switches. (It's very easy, but you'll need a magnetic screwdriver for one of the screws, at least to reattach the screw.) Anyway, I checked all 3 switches with a meter and all 3 seemed to work. The middle door switch is NC (normally closed)…