Header banner
Revain logoHome Page
proto pasta cfp11705 original carbon fiber logo

Proto Pasta CFP11705 Original Carbon Fiber Review

3

·

Average

Revainrating 3.5 out of 5  
Rating 
3.7
🖨️ 3D Printing Supplies, 🏭 Additive Manufacturing Products

View on AmazonView on ЯM

Media

(3)
img 1 attached to Proto Pasta CFP11705 Original Carbon Fiber
img 2 attached to Proto Pasta CFP11705 Original Carbon Fiber
img 3 attached to Proto Pasta CFP11705 Original Carbon Fiber

Description of Proto Pasta CFP11705 Original Carbon Fiber

Stiffer than PLA with better Dimensional stability for warp-free printing, excellent layer adhesion, and easy support removal. Comes on fully corrugated recyclable spool with standard dimension. Matte Black finish on prints that hides layer lines for more attractive Printed parts. Processing is comparable to standard PLA. No heated bed required. Process may be less consistent on smaller nozzles (< . 4mm) and/or bowden Type machines. We recommend printing this material at 190c-230c using a 4 mm or larger nozzle. Please Note that this filament is more brittle than normal PLA and requires more careful handling to prevent breaking. Designed and manufactured in the USA with quality and customer service as a top priorities. Usa sourced packaging and labor.

Reviews

Global ratings 3
  • 5
    1
  • 4
    0
  • 3
    2
  • 2
    0
  • 1
    0

Type of review

Revainrating 5 out of 5

The best material I have ever printed with

This is my favorite printing filament. I think the other reviews pretty much cover that, but I had to join the crowd. The matte black finish is great. I'm new to 3D printing but I've bought a lot of filament to experiment with, especially the custom filaments like carbon fiber, wood, and bronze filler. I have not yet used a material with a comparable/better surface quality. I printed at 200°C/0.1mm layer height and the carbon fiber structure seems to hide the layer lines on the side of the…

Pros
  • Additive Manufacturing Products
Cons
  • Cord is shorter than other materials

Revainrating 3 out of 5

Great prints, terrible adhesion and distortion of detail.

Shit sticks. This is the only thread I need to use glue on my steel platform. No problem with everything from PLA to PC blends. But this stuff won't stick to the cleanest bed with a slightly lower Z setting than usual. My Prusa came with a glue stick so it's fine. I used it. He's stuck. The print quality is fantastic, as everyone has said, it's true. You don't have to repeat them. Made 0.5mm thick prints (ribs) that are stiff and usable when I usually have to print 1mm thick PETG to say the…

Pros
  • 3D printing consumables
Cons
  • No performance

Revainrating 3 out of 5

This is a different experience

***** Update 2016/12/15 ****** I did some test prints and this seems to be the best temperature extrusion settings. Temperature: 190°C to 200°C gives the best surface finish. 210C+ (I've tested up to 235C) started to have a rougher, more bubbly finish. 190C does not have very good interlayer adhesion. 200C has very good adhesion. Extrusion: Range 0.95-1.05 tested. It looks like an extrusion ratio of 1.00 seems to be the best setting, which is usually the default anyway. A range between 0.98 and

Pros
  • Industrial & Scientific
Cons
  • A newer model could have been chosen