Radio relay unit HiTE PRO Relay-1 Review

Radio relay block for lighting control using Hite PRO wireless switches and remotes. Closes / opens an electrical circuit when a signal is received. Single-channel radio relay HiTE PRO Relay-1 The radio channel relay HiTE PRO is designed for remote control of the power supply of electrical appliances. The device is connected to the break in the electrical circuit in front of the lamp or other equipment and opens / closes the power circuit when it receives a signal from an external transmitter (remote control or wireless switch). The signal is received at a frequency of 868 MHz at a distance of up to 250 meters. Up to 200 transmitters can be stored in the memory of the Relay-1 unit, each of which operates in one of five modes: on / off, monostable, on only, off only, auto-off timer. A detailed guide for configuring Relay-1 is provided in the "Documentation" section. The HiTE PRO relay can be "linked" to the Gateway smart home server. With this scheme, it is possible to control lighting using a mobile phone (including setting up work scenarios) and the voice assistant "Alice". Mounting Recommendations The radio relay should be connected to a single-phase alternating current network in the break of the phase and neutral wires. To exclude the possibility of electric shock, it is allowed to mount the relay unit only when the mains voltage is off, following the instructions and observing safety precautions. The maximum allowable power of connected electrical appliances is no more than 1000 watts. The maximum section of the cable clamped into the terminal block is 1.5 mm2. The HiTE PRO relay works only in conjunction with HiTE PRO switches and remote controls. Connecting a radio switch from another manufacturer to the relay will not work. Advantages The size of the relay with a matchbox - can be connected to any lamp or floor lamp; Receiving a signal from the switch at a distance of up to 250 meters; Relays can be linked to an unlimited number of switches; Screw terminals simplify the installation of the device; Built-in protection - works when the starting current or the maximum allowable load is exceeded; Ability to integrate with the Smart Home server - set up scenarios, control lighting from a smartphone or voice assistant "Alice"; Auto-off timer function; Non-volatile settings memory; Low power consumption of the block (only 0.35 W); Operating temperature range: -30 to +50°С; Affordable price.