RAM Crucial 4GB DDR4 2400MHz DIMM CL17 CT4G4DFS824A Review

I took it for a working computer, I had to increase it to 8 GB. (4 + 4) was not enough for the simultaneous operation of the browser with a bunch of open tabs, vatsap, telegram and several excel spreadsheets. Now everything works great. I recommend.

Athlon 200ge can't handle memory frequencies higher than 2666, so I didn't try higher, but I'm sure that this memory with native timings can easily take 2933. In budget assemblies on am4, that's it. I ated the BIOS, so I will add a review, it keeps stable 3200 at 1.26v 18-19-19-40

Acquired in the month of September 2022. I used the Prime z370-a motherboard with an Intel i5 8600k processor, and through the BIOS, I changed the frequency to 3000 megahertz without adjusting the timings or the voltage. The timings in the bios were set to 16-18-18-36, and the voltage was 1.34. Everything worked properly. All of the tests were successful, and everything is in order.

I began by taking two bars that were each worth 1700, and then I took two additional bars that were each worth 1200. With his Ryzen 5 2600 and mother Gigabyte ds3h, overclocking looks like this: at 2933 GHz timings 18-18-18-18-42, the voltage in the bios is 1.32 volts, but in reality in hell it rises from 1.344 to 1.356, while the delay is roughly 76, and while overclocking for all cores up to 3.9 GHz, it is 74. When you use the computer with the default frequency and timings, without…

Ryzen 3 2200g ended up running at a frequency of 3200 on the Asrock b450 motherboard with timings of 19-19-19-39. This was accomplished without increasing the voltage. Two separate 4GB memory sticks. There is a good chance that it is feasible to obtain smaller values; however, because I was increasing the voltage, I decided against doing so because this is not a gaming machine. In my opinion, it is not rational to pay an excessive amount for a wide variety of attractive radiators. Since there…

Bought in September 2022. In conjunction with the Prime z370-a and i5 8600k, without picking timings and voltage, I simply set the frequency to 3000 MHz through the BIOS. Everything worked, the bios set the timings to 16-18-18-36, the voltage was 1.34. All tests passed, everything is ok

Wound up on the Asrock b450 motherboard at a frequency of 3200 with timings 19-19-19-39, Ryzen 3 2200g, without raising the voltage. Two sticks of 4Gb. It is probably possible to get smaller values, but with raising the voltage, I did not do this - the computer is not a game one. I think it makes no sense to overpay for all sorts of beautiful radiators. For some reason, there are few reviews on these bars - I decided to add my impressions.

First I took 2 bars of 1700 each, then 2 more bars of 1200 each. on his Ryzen 5 2600 and mother Gigabyte ds3h overclocking is like this - at 2933 GHz timings 18-18-18-18-42 the voltage in the bios is 1.32 volts but in fact in hell it jumps from 1.344 to 1.356, while the delay is about 76 and during overclocking for all cores up to 3.9 GHz - 74. With the standard frequency and timings, without overclocking, you feel a slowdown in using the computer, so take it either under intel or under…