🔋 Schumacher Fluid Adjusting Battery Filler - Optimizes Battery Fluid Levels Review

Has to clean both his wife and his own car battery. This tool is perfect. After cleaning the battery with a mixture of baking soda and water, I approached the terminals with this tool and it worked really well. My wife hasn't cleaned for a long time and it made them look like new again. I would suggest a combination of rotating back and forth and moving up and down to get a smooth movement across the entire terminal. Very glad I bought this!

One of those things people always forget. You must keep these connectors clean or your battery will fail and die. This is the way to purify them. It's cheap Chinese junk. But it works. The brushes are hard and strong. It's garbage business. But if you keep it in a clean, dry place and use it every time you change the oil (just one way to remember it), it's fine and should last forever. It's 4 dollars. Get one. Use it. Your battery will thank you. thank you for reading

Do not try to use these other than the battery posts. If you are tempted to put other objects in the hole, you may feel a tingling reaction. This will clean the battery terminals. In some cases, you can resurrect an old battery or extend the life of working batteries simply by eliminating terminal corrosion. After cleaning with a tool, apply a liberal coat of dielectric grease to the terminals and contacts to prevent future corrosion. , repel moisture and improve weather resistance.

I know next to nothing about trucks. They were easy to install. You are looking very beautiful. Everything is tight and works great. I installed a new Optima Batteries 8020-164 35 RedTop starter battery and a Schumacher BAF-J10 clamp hook kit with an aluminum car battery bracket (matte red). After reading other reviews I have also used: NO-OX-ID A- Specialty Electrical Contact Lubricant- Protects metals from rust and corrosion- Part #10203 and Battery Post Anti-Corrosion Washers, Fiber Battery…

I might have gotten a lemon but after cleaning a battery/cable set it's gone. The wire bristles are too soft and will squeeze a woman's hand and put pressure on a man's. I started by cleaning the positive top pin, when I got to the smaller diameter negative pin it didn't touch the metal pin. I used an externally threaded brush on the negative cable t-bolt that GM uses to secure the cable connector to the post and when I pulled it back out I had a pencil sized brush. I have and have had two of…

I have a 2007 Toyota Tacoma and at one point the J-bolt fell off, impacting my battery and effectively turning off one of my headlights. These J-bolts are very long, just what I needed. I've tried two others in the past that didn't last long enough. The only problem I had installing the screw was that the wing nut was too wide to rotate next to the piece of metal at the top of my battery to hold it in place. I was able to cut the wing nut to work on my truck but it wasn't a big deal and having…

I got this tool because my last one did a good job for decades. Well used but time to ditch it and get a new one for the next few years of work. We may not think about our batteries in our cars, trailers, or for our fishing boats. We need to take care of our batteries. For a very good contact, keep the connector clean. This tool does an excellent job of cleaning the inside of cable connectors to help support the contact area as well. Take it in hand and keep the battery posts and cable…

You are in the middle of the road. I want to be completely honest, when I bought this I was a little swayed by the description which somehow seemed to indicate that these battery cleaners are well above the "standard" you can buy elsewhere. You are not. They are just like any other cheap battery post cleaner I've ever had. The inner diameter brush bristles are not "reliable" so one turn on the inner connections is barely enough to clean them. You really need to clean up the good. I've had other