Secure Your Trailer Hitch With TOPTOW 64705 Anti-Rattle Clamp Review

The receiver extension that I put in my front hitch was very loose and rattling a lot. This anti-rattle clip was the perfect solution; no more rattle or moving! Not very useful for items that will be frequently removed, as this is designed to be a semi- permanent solution.

These are great! Always seems like tow hitches are to loose and rattle. No more metal clingy with these . Absolutely love them

Product came on time and undamaged which is always good. This product is a necessity not a luxury. Especially if you're hauling a motorcycle on a motorcycle rack. It prevents a lot of wobbling and looseness in the assembly which will only get worse in time. This product is worth its weight in gold. It does an excellent job!

I had to squeeze the U bolt together in a vise to get it to fit through the plate holes. I supposed I could have drilled the hole bigger but the plate is anodized. Works great if you have a vise to squeeze the u bolt or don't mind drilling the hole bigger. It should have come with slotted hole to accommodate variances in different batches of u bolts.

These were great. I bought a dual hitch extender to haul a trailer and hold a bike rack. These were awesome to hold the hitch tight and snug. The lower hitch spot was too close to the upper spot so when my trailer slid in to get on the ball the top lock pin hit the bike rack and locked down before the hitch lowered onto the ball. The quick fix was to take the top tow hitch tightener off - pull the hitch - put the ball into the receiver then roll it forward back into the the 2" hitch receiver…

Easy to install and seems like good quality. Before installing the receiver hitch would move around about 1/16 of an inch, now it is rock solid. Good safety investment.

Purchased to stabilize our hutch to pull our boat. Works great and no more rattling noice from the hitch. That's my feedback.

Good product that I would certainly recommend to others looking for anti rattle devices. Just wish it had a tighter fit to counter horizontal sway more. I use it to stabilize a 4 bike carrier and a bumper step on a dual hit mount.

the rise difference between my hitch and 1.5 to2 inch adapter is bigger than the lip of the brace, so it does not contact the shaft and create a brace. i had to install it upside down and backwards at an angle to get it to contact both shafts. that is how they say not to do it as the bolts go thru at an angle this way. however, it seems to be working ok so far. on the hitches that don't have this depth issue (2in to 2in) they work great.

I used this to stabilize a storage platform on the back of my van. It was rattling bad before I put this on and its rock solid now. Been on for about three months now and never needed adjustment.

Very well built and thick, however just a bit too wide to fit between my receiver and some of the plastic on the bottom of my bumper, not a huge deal though since that's what Dremels are made for.

Seems sturdy and definitely eliminated the wobble I had on my hitch for my added platform. Simple 3/4 nuts to tighten and then good to go.

These clamps removed all loosness on my car carrier. I use both on my 1.25" to 2" reciever adapter. No flex or bending when tightened to 30 ft lb.

These work great to tighten the connection at the hitch when using my cargo carrier and with the wheelchair rack on my moms van. Eliminate the annoying rattle and vibration almost completely. Do recommend taking a wrench along to retighten along the way if roads are rough.

This is a nice quality product. Definitely worth the price. Is eliminated the rattle in my trailer hitch. Thanks for attention.

These work fine but you need to tighten up each side a little at a time or the U-bolts won't come off easy when removing them. I finally got them off, but the U-bolts won't go back on without a lot of force now. Lesson learned, be patient when installing them!

The hitch tightener appears to be good quality. The blue powder coat seems to be good quality and the color is even. Bolts are sturdy. The install was easy enough as it only fit on one side of the 2” receiver. If I were installing on an 1-1/4” there’s nothing telling which direction the angled plate should face. It’s a 50/50 chance so if you get it wrong, flip it around and you’re good to go. It’s the only complaint I have though.

These hitch tighteners really did the trick. I have used the same 2" hitch bike carrier for 20 years and never thought about the movement due to the loose fit. I purchased a 2nd carrier to get six bikes on our Suburban for our spring break trip. Someone recommended this product so I bought them and used them on both my old and new carrier. They worked great by cinching down the carrier to the hitch so there's no movement. I highly recommend this product!

This worked just as expected. I honestly like the blue powder coat on it! It adds a nice touch of color where there would normally be nothing!

For the price, I was afraid that the stabilizers were going to be cheap and flimsy. Boy, was I wrong! They are heavy duty and very sturdy. I mounted them on a spare tire carrier that fits in the 2 inch receiver on my UTV. Without the stabilizers the carrier rattles and wobbles all over the place. With them, it is solid as a rock.