🖨️ Combo Pack: Compatible Toner Refills + Chips for Konica Minolta MagiColor 1600W, 1650EN, 1680MF, 1690MF Printers Review

I have put off refilling toner cartridges for my laser printers for the years I've used them, but finally decided to give it a try. It looked like the most economical product. The company has 2 videos online with instructions to watch (no instructions) and they are pretty self explanatory. Most of the main video consists of cleaning the old cartridge, ie. H. Removes all traces of the old toner, but then you simply top up with new toner and insert a new chip. They show that cleaning is done with

I used this kit to refill black toner in my Magicolor 1600W. I still have cyan, magenta and yellow toner bottles when they run out. It just works. The video is sharp but at first glance it feels "fake" like it REALLY can't be that easy. But it is.========================================== = === ============ UPDATE: I refilled my black toner to 100% and over time it went down to about 50% and then the black toner cartridge failed. The prints were terribly stupid. I'm not sure if it's "broken"…

Refilling those cartridges is very easy with this refill kit. I don't even try to vacuum up the old toner. I simply remove the cap from the end of the cartridge, put in new toner and change the chip. made 5 minutes. 20 minutes to fill up all four. My prints look the same as they did with OEM cartridges. I have three Konica Minolta 1600W, 1650EN and 1690MF printers and I run them all with this kit. Our company saves hundreds of dollars every month by purchasing OEM cartridges. I will buy another

Very easy to use but make sure to wear gloves and be in a place where nothing can get on powder. They recommend removing all of the old toner, which is good for the first time so the marks don't mix, but after that I wouldn't worry if you're using the same refills. You still only get a certain amount of chip usage. That's why you get a new chip.

The bottles leaked in the packaging came with two different types of caps, one bottle is different. Everything seems to be working after clearing up the mess in the packaging. Be sure to vacuum out your old toner cartridge and consider replacing it if you've already done a few refills and are experiencing printing issues.