Header banner
Revain logoHome Page
smartparts 320300 3-inch butt 🔧 joint stainless steel exhaust clamp with i-block logo

SmartParts 320300 3-Inch Butt 🔧 Joint Stainless Steel Exhaust Clamp with I-Block Review

11

·

Very good

Revainrating 4.5 out of 5  
Rating 
4.6
🌫️ Exhaust & Emissions, 🛠️ Replacement Parts

View on AmazonView on ЯM

Media

(1)
img 1 attached to SmartParts 320300 3-Inch Butt 🔧 Joint Stainless Steel Exhaust Clamp with I-Block

Details

MaterialStainless Steel
BrandSmartParts
Item Dimensions LxWxH8 x 6.75 x 3.5 inches
ColorStainless Steel
Item Weight1.1 Pounds

Description of SmartParts 320300 3-Inch Butt 🔧 Joint Stainless Steel Exhaust Clamp with I-Block

Product Overview

The SmartParts 320300 Joint Stainless Exhaust is a top-quality exhaust system designed to enhance the performance and durability of your vehicle. Crafted with precision from 300 grade stainless steel, this exhaust system guarantees exceptional corrosion resistance and longevity. Its included hardware ensures easy and accurate installation, saving you time and effort.

Key Features

1. Superior Seal: This exhaust system conforms seamlessly to your vehicle's pipe and flex tubing, creating an impeccable seal without causing any distortion to the pipes. The result is an optimal flow of exhaust gases, improving engine performance and fuel efficiency.

2. Heavy-Duty Construction: Engineered and tested to meet the highest heavy-duty standards, the SmartParts 320300 Joint Stainless Exhaust is built to withstand harsh conditions and deliver long-lasting performance. Whether you're tackling rough terrains or hauling heavy loads, this exhaust system can handle it all with ease.

3. American-Made Quality: Crafted with pride in the U.S.A, this exhaust system reflects the commitment to quality and precision that defines American manufacturing. By choosing the SmartParts 320300 Joint Stainless Exhaust, you support local production while enjoying a reliable and superior product.

Applications

This exceptional exhaust system can be used in a variety of vehicles and scenarios. Here are some notable applications:

  • Automotive Maintenance: Replace worn-out or damaged exhaust systems with the SmartParts 320300 Joint Stainless Exhaust for optimal performance and improved engine efficiency.
  • Automotive Upgrades: Upgrade your vehicle's exhaust system to enhance its overall power, torque, and sound, providing a thrilling driving experience.
  • Replacement Parts: Ideal for mechanics and automotive enthusiasts seeking high-quality replacement parts, the SmartParts 320300 Joint Stainless Exhaust ensures reliable performance and a perfect fit.
  • Custom Builds: Incorporate this exhaust system into custom vehicle projects, offering a combination of style, performance, and durability.

    • Experience the benefits of the SmartParts 320300 Joint Stainless Exhaust, a reliable and durable exhaust system designed to optimize your vehicle's performance. Upgrade your ride today with this top-of-the-line product!

    Made of 300 grade stainless steel. Included hardware makes for easy and accurate installation. Conforms to pipe and flex tubing to create the best seal available without distorting pipes. Engineered and tested to conform to the highest heavy duty standards. Made with quality and pride in the U.S.A. Order New #320300X. Fit type: Vehicle Specific.

    Hide

    Reviews

    Global ratings 11
    • 5
      10
    • 4
      0
    • 3
      0
    • 2
      0
    • 1
      1

    Type of review

    Revainrating 5 out of 5

    Solid product for clamps

    I removed the rusty exhaust from my trucks and used it to adjust the steering. It's been 3 years and he's still on the truck. Works as intended.

    Pros
    • One year trial period
    Cons
    • There are downsides

    Revainrating 1 out of 5

    Didn't fit my 3 " tailpipes

    did NOT fit my 3" tailpipes. I tried it and it just didn't come together completely and close. This will probably work fine on 2 3/4" pipe. I work with cars and trucks a lot and was hoping to use these instead of welding to make the install easier next time. Ended up in a fight!

    Pros
    • Good stuff
    Cons
    • Not bad but...

    Revainrating 5 out of 5

    worked better than expected.

    Dressed up my Mustang just to take me to the muffler shop to have it done professionally. It sounded good when started and didn't leak, so I've actually been riding two of them for a couple of months now (yes I'm broke and stingy and don't want to pay for exhaust right now). One day I'll take it off, but if it ain't broke don't fix it.

    Pros
    • Lasting Test Results
    Cons
    • Updates Available

    Revainrating 5 out of 5

    Works great, no rust and mostly no leaks

    I used this to join two fairly straight exhaust pipes about 1/8" apart. The original installation caused a small leak so I added an exhaust pipe. Sealent and tried again with great results. With the help of an exhaust sealant, the joint is rock solid and basically feels like a one-piece pipe. The connection also doesn't rust, so this part is really stainless steel.

    Pros
    • Easy install
    Cons
    • Clean

    Revainrating 5 out of 5

    3 " Subaru Success exhaust

    I bought a used Cat Back exhaust for a Subaru and had the middle pipe flange cut/turned and welded on for another downpipe. I cut the pipe and was able to twist it to match the downpipe flange and connect it to the other half with this shock collar.No leaks and it's almost imperceptible when you hold the bolts on top of the exhaust pipe.Good product.if you don't have access to a welder to have!

    Pros
    • GOLS certificate
    Cons
    • I don't really like it, everything is fine

    Revainrating 5 out of 5

    So far, so good. I was a little afraid of the absence.

    So far so good. I was a little worried about the lack of detailed instructions. Nothing says how the unit will be installed, it simply comes pre-assembled for easy installation. I always like to double check these things as the block is not symmetrical at the top and bottom. In the end I just trusted the company to put it together correctly and installed it as is (smooth radius on bottom closest to pipe, sharp edge from pipe). tightened to 55 lb/ft. It stayed on the first drive, will be updated

    Pros
    • Absolutely amazing!
    Cons
    • Slightly torn

    Revainrating 5 out of 5

    Do-it-yourself exhaust system replacement... not as easy as expected.

    I'm changing the engine on my 1990 Chevy K2500 350 5.7L and had to replace the exhaust from the engine to the muffler...replaced the rest not long ago. I was hoping it would be easy to convert a 3" ID to a 3" OD and I was wrong. The Walker 15034 converter I installed had a 3" ID on both ends, which was fine for the exhaust pipe from the header, but the result was my Dynomax 42606 link pipe slipping into the converter, not the other way around... the connection pipe had to make up for the…

    Pros
    • New
    Cons
    • Modern

    Revainrating 5 out of 5

    worked better than expected.

    Put on my Mustang just to take me to the muffler shop to have it done professionally. It sounded good when started and didn't leak, so I've actually been riding two of them for a couple of months now (yes I'm broke and stingy and don't want to pay for exhaust right now). One day I'll take it off, but if it ain't broke don't fix it.

    Pros
    • Fits tubing and flexible tubing and provides the best seal without tube deformation.
    Cons
    • Quality

    Revainrating 5 out of 5

    Subaru Success 3 " Exhaust

    Bought a used Subaru Cat Back exhaust, center pipe flange was cut/turned and welded on for another downpipe. I cut the pipe and was able to rotate it to meet my downpipe flange and connect it to the other half with this butt clamp. No leaks and almost impossible to find if you hold the bolts on top of the exhaust pipe. Great product if you don't have access to a welder!

    Pros
    • 300 Stainless Steel
    Cons
    • Functionality

    Revainrating 5 out of 5

    So far, so good. I was a little afraid of the absence.

    So far so good. I was a little worried about the lack of detailed instructions. Nothing says how the unit will be installed, it simply comes pre-assembled for easy installation. I always like to double check these things as the block is not symmetrical at the top and bottom. In the end I just trusted the company to put it together correctly and installed it as is (smooth radius on bottom closest to pipe, sharp edge from pipe). tightened to 55 lb/ft. It stayed on the first drive, will be updated

    Pros
    • Hardware included for easy and accurate installation
    Cons
    • No

    Revainrating 5 out of 5

    Do-it-yourself exhaust system replacement... not as easy as expected.

    I'm changing the engine on my 1990 Chevy K2500 350 5.7L and I needed to change the exhaust from the engine to the muffler...the rest was replaced not long ago. I was hoping it would be easy to convert a 3" ID to a 3" OD and I was wrong. The Walker 15034 converter I installed had a 3" ID on both ends, which was fine for the exhaust pipe from the header, but the result was my Dynomax 42606 link pipe slipping into the converter, not the other way around... the connection pipe had to make up for…

    Pros
    • Designed and tested to the highest standards for heavy-duty applications. Made in the USA with pride and quality
    Cons
    • Lightly dented