Welding machine inverter type Solaris Semi-automatic welding machine SOLARIS Topmig-226 (TOPMIG-226WG3), MIG/MAG Review

Advantages: - Euro connector for the torch; - WG-15AK torch (3 meters) included; - The size of the installed coil is up to 5 kg / 200 mm; - Possibility of changing the polarity for welding with wire without gas (FLUX); voltage (from 160V);- IGBT-transistors;- Metal wire feeder;- Powder coating of the body and aluminum casing increase the corrosion resistance of the device;- Aluminum carrying handle; protect other devices from interference. ATTENTION! The device is supplied without a plug. In case of operation at maximum currents, the device must be equipped with a single-phase power plug 32A 230V (not included). Complete set: Inverter semi-automatic; Welding torch 3 meters (supplied in a separate box); Earth terminal with cable 2 meters; Gas hose 2 meters; Wire feed roller 0.6-0.8 mm (installed in the wire feed mechanism); Technical characteristics : Mains voltage ~ 160 - 240V Mains frequency 50/60 Hz Mains type 1 phase Open circuit voltage 67 V Rated output (MIG) 20-220 A Rated wire feed speed 1.5 - 9.1 m/min Duty cycle (DC) at max. current at 40°C 35% (EN 60974-1) at 20°C 60% Rated input current 16 AMaximum allowable input current 28 A Rated power consumption at max. current 3.4 kWRecommended generator power 6.5 kVA Wire diameter 0.6-1.0 mmEfficiency 0.91Power factor COS 0.87Insulation class HProtection class IP21SGas connection 9mmWeight (without accessories) 14.3kgDimensions (LxWxH) 440x197x340 mmWarranty period 36 months