🚗 TASAN RACING Stainless Steel Brake Pedal Footrest Cover Accelerator Brake for VW Golf 7 GTI MK7 Skoda Octavia Audi A3 S3 Review

Looks great and the quality is identical to our other Audis that came with these pedals! Installation takes less than 5 minutes

Se ve increíble le cambia el aspecto al Carro por dentro. Tener cuidado al instalar el reposapies. Lo hice viendo un video y rompí un clip de seguridad que tiene una pieza que hace parte del carro. Nada grave pero es mejor tener cuidado con la installación.

Very happy with the product! The installation took me 5 minutes. On the Audi A3 2019: The footrest of the brake pedal can be easily removed. The accelerator pedal footrest does not need to be removed; Just install the new one from the bottom up. On the main footrest, pull the footrest toward the hood lever, and then pull the hood lever slightly to complete the footrest removal. reverse operation on the footrest. The product looks OEM and gives the car a new, even more prestigious look.

Looks MUCH better now. The rest of the pedal isn't as bad as everyone says. There is no panel to remove. You gently press your fingers on the plate to the left of the pedal and start prying the standard pedal from the top right corner and literally pulling it until it pops out. I took mine off without even breaking the clips. Make sure the new tabs line up with the factory holes and insert them. The rest speaks for itself.

Very easy installation. It took about 5 minutes (if that). Looks just as good as the originals. Installed on A3 Premium Plus 2017. No instructions but pretty clear. Brake pedal - remove the old one and replace it with a new one. The gas pedal is a bit tricky. I managed to get mine on by laying it on one side, then pressing on the other and wiggling it. Footrest - pull the old one and it pops right out. Align the new one with the tabs, insert and press down.

The leftmost pedal will probably be the hardest part of the installation and actually only took 5 minutes. You will need to keep wiggling the plastic hood latch plate until the fairing snaps into place and looks like a standard fairing. You will also need to pull on the fairing so the clamp portion of the pedal goes under the fairing or it will stick out. But it took less than 5 minutes to put the brake pad and gas pedal together, very easy! Just make sure the rubber protectors enclose the…