Header banner
Revain logoHome Page
tcmmrc blheli_s electronic controller quadcopter logo

TCMMRC BLHeli_S Electronic Controller Quadcopter Review

6

·

Very good

Revainrating 4 out of 5  
Rating 
4.2
🎥 Video, 📷 Camera & Photo

View on AmazonView on ЯM

Media

(4)
img 1 attached to TCMMRC BLHeli_S Electronic Controller Quadcopter
img 2 attached to TCMMRC BLHeli_S Electronic Controller Quadcopter
img 3 attached to TCMMRC BLHeli_S Electronic Controller Quadcopter
img 4 attached to TCMMRC BLHeli_S Electronic Controller Quadcopter

Description of TCMMRC BLHeli_S Electronic Controller Quadcopter

� 〖 Stability and Durability 〗: Built-in 5V@2A BEC. Instantaneous current 50A 6S. The 30A BLHeli Dshot600 ESC is designed to provide smooth power for your electric motor with excellent stability and durability. ESC supports Dshot up tp 150 / 300/600. � 〖 Advanced 〗: Using high-performance EFM8BB21F16G microprocessor, operating frequency up to 48MHz. High-quality 5×6 packaged MOSFETs are more reliable than 3×3 packaged MOSFETs. � 〖 Professional 〗: Standard M3*30.5*30.5 mm mounting holes; Vibration and shocks can be perfectly avoided by adding dampers; Rational layout design with extended solder pads ensures easy builds, fixes, or adjustments. � 〖 High-Efficiency 〗: The 6-layer high TG 3OZ copper thick PCB sheet greatly reduces heat generation and is more efficient. The MPU6000 gyroscope with SPI bus mode has a fast response time and excellent shock absorption. � 〖 Practical 〗: Using the BLHeli_S open-source program, you can upgrade the firmware or change the ESC parameters through the throttle signal line to support all BLHeli_S functions. ESC has a reasonable layout according to the installation requirements of most pilots. The functional pads are grouped together to avoid jumpers.

Reviews

Global ratings 6
  • 5
    2
  • 4
    3
  • 3
    1
  • 2
    0
  • 1
    0

Type of review

Revainrating 4 out of 5

Great buy for the price. Great packaging too

Super small esc. To be honest I did 2 covers and 5s and it was still cool in a heavy quad with 1507 3900kv motors. Those are nuts. The 3 inch bolt and adjuster was great

Pros
  • Ready
Cons
  • Functionality

Revainrating 3 out of 5

5V output measured 6.4V

The 5V power supply smoked my controller which can handle a maximum of 5.6V. I measured 6.4V from the 5V output on the board. Definitely out of tolerance. Measure before connecting to this power supply.

Pros
  • Decent performance
Cons
  • No instructions

Revainrating 5 out of 5

blheli 32 not blheli s

this is a great product. The pinout was perfect for the jb f7 flight controller. The dishes supplied do not fit. Generally if your pc is 8 pin use the one that comes with the flight controller, not esc. and these ESCs support Blheli 32

Pros
  • like everything up to
Cons
  • say nothing

Revainrating 4 out of 5

Good deal, just keep your eyes peeled!

I bought this to replace the one on my tyro79 because it had the same ratings and specs. The only thing I didn't know was that it had a different pinout and blew my flight controller. But it's my fault, I think I didn't acknowledge it. The heat from this regulator isn't too great because it doesn't feel too hot, and its thickness makes it easy to install in a 3-inch microcontroller like the Tyro79. Now I need to find a flight controller with the same pinout configuration because plug and play…

Pros
  • Great for me
Cons
  • Mostly good but...

Revainrating 4 out of 5

Nice no info

Well until these dimensions are shown they are obviously for the box it comes in which is pretty much useless. Seems to be a very high quality PCB. The components are very good and the layout is simple. The solder pads withstood quite a bit of heat and didn't come off after soldering. The item comes with an 18AWG power cable with xt90 connector and plug for inputs from FC. If you're using Stack then that's fine, but I'm not using a Pixhook and need a custom harness. I haven't turned it on yet…

Pros
  • Always liked
Cons
  • Almost everything is there

Revainrating 5 out of 5

Odd Pinout for FC: Remote and App Controlled Vehicles and Parts

The pinout is not standard on most flight controllers. I bought this to replace my Typhoon with an Omnibus F4, but the pinout on this board is very different from the Typhoon (and FC). Doesn't fit my FC edition. The included harness has a smaller connector, so for the FC side I had to remove each pin from the connector and put in a larger connector for the FC side of the harness. It also allowed me to change the order of the wires. When installing the battery, all four motors beep and the…

Pros
  • Pleasant
Cons
  • No Form Required