🔫 TCP Global Air Rust Proofing and Undercoating Gun: Precision application with Gauge, Suction Feed Cup, and 2 Wands! Review

Was very impressed with this purchase. I sprayed my truck frame with this device and it worked great. I don't do this for work, but it's great for my needs.

If you want to prime with a quality product, you need a primer spray gun. The product I use is thick and requires this gun you don't need to and shouldn't dilute. It's just that a spring for the right syringe isn't all that expensive.

Used a 360 degree tip. Paint supply was better than expected so line pressure was reduced from 50psi. 35psi worked well for even paint thickness. I didn't need to use a straight handpiece for my project.

Haven't really used this yet, sprayed through some cleaner to appreciate the spray, want to cover my frame rails, like the spray, see no problem with servicing thinner viscosity, it must just one extra coat to cover, excellent spray pattern.

I have used this gun to prime 5 of my cars and even after cleaning I kept it and next week I'm going to use it to bedliner my rear bumper conversion and mine Fender sprayed flares, cap and 1/3 side of my 2013 Ram 1500. The only real downside to this gun is some sort of weak trigger mechanism, but that can be attributed to my rough handling of tools. Trust me when I say this FOR MONEY, it's not a problem. Buy it!

Worked great when I sprayed anti-corrosive on my jeep frame. I found that her wand was screwed directly into the threaded end of my air gun's nozzle. I first used this to blow all the dirt and mouse crap off my frame. I then used a 360 wand to spray the oil mixture to prevent rusting. I use 25% PB Blaster and 75% motor oil. I've read that if you're using a commercial paraffin-based treatment, a preheat is required for it to atomize well. I have also used it in our new open plan lounges. Her…