🕹️ Thermaltake Versa H17 Black Micro ATX Mini Tower Gaming Computer Case 2.0 Edition CA-1J1-00S1NN-A0 with Pre-Installed 120mm Rear Fan - Ultimate Gaming Case! Review
17
·
Very good
Rating
4.6
🎒 Computer Cases, ⌨️ Computer External Components
Media
(4)
Details
| Brand | Thermaltake |
|---|---|
| Color | Black |
| Material | Spcc |
| Hard Disk Form Factor | 2.5 Inches |
| Cooling Method | Rear (exhaust) : 120 x 120 x 25 mm fan (1000rpm, 16dBA) |
| Motherboard Compatability | Micro ATX |
| See 4 more | |
Description of 🕹️ Thermaltake Versa H17 Black Micro ATX Mini Tower Gaming Computer Case 2.0 Edition CA-1J1-00S1NN-A0 with Pre-Installed 120mm Rear Fan - Ultimate Gaming Case!
[Elegant front panel] – Aluminum brushed like front panel provides simple elegant aesthetic. [Enhanced airflow] – perforated top panel heightened food stands and specially designed cable routing gap enhance airflow for better ventilation. [Full-length PSU cover] – special ventilated design enhances airflow and hides unsightly cables. [2+2 drive bay] – 2 5” x 2 + 3 5” x 2. One 120 millimeter rear fan pre-installed.
Pros
- Laconic design, questions to it at least. Compact size. A contemporary case that contains all of the required components.
Cons
- There are some drawbacks associated with this particular price category, which are brought about by the low cost of the case (well, this mesh is on top, liquid metal, and plastic muzzle). But considering the cost, it's a decent deal.
Pros
- Appearance, the quality of the materials, and how easy it is to put together. According to the numerous testimonials available, everything is excellent.
Cons
- Very narrow openings for air in the front of the device. In point of fact, the blowing fans are virtually completely ineffective. There is a hole on the front side that allows air to enter from below, but because it does not have a filter, there will be a lot of dust. If you utilize the case in its current configuration, the fan on the rear wall will pull air from the seat that is located underneath the fan on the top. There will be only a slight blowing out of the motherboard. The casing of the bp cannot be removed. Because the maximum height of the cooler is 155mm, you cannot install a tall tower.
Pros
- A low-cost, compact casing with a contemporary design that has a more traditional appearance. Rubber spacers for drives, dust filters on the bottom and top, a separate PSU and HDD bay, room for a 2.5" SATA SSD, space for cables on the right side and a cable tie mount, a quiet and efficient exhaust fan, and space for mounting additional components on the front and the top.
Cons
- 1 USB 3.0 port on the front, no dust filter on the front, and non-standard mounting screws for the hard drive that cannot be inserted onto an SSD since the thread is too small. In general, the majority of SSDs cannot be normally mounted on the screws that are included in the kit. The screws that are designed for installation through rubber bushings do not fit the thread, and if the bushings are removed (they are not particularly needed for SSDs), the holes remain too large. In this case, you will need to place washers under the small screws that are included in the kit.
Pros
- material excellence Simple equipment design Price
Cons
- Lack of
Pros
- Cable organization (there is a ton of room for wires behind the right wall). Ties and Velcro recessed behind the right wall. Standoffs and several mounting screws are included. holes for mounting both new and vintage micro ATX motherboards. convenient gadget fastening for 3.5 and 2.5. Included is a quiet fan. includes speaker (tweeter). Exceptional craftsmanship, rolled edges. Magnetized dust filter mounted on the top wall. On the power supply's bottom wall is a dust filter. On the legs of the body are rubber stickers. reputable audio jacks. steel, which is thick. PCI-E expansion slot covers that can be used again and again.
Cons
- There is no way to remove the power supply cover. The power supply's mounting holes are offset. On the back wall, near the PSU mounting holes, a thin coat of paint. Installing a "Top-flow" cooler and a case fan opposite each other on the back wall may be challenging. The front does not have a dust filter.
Pros
- Aspects: Sizes - Present day design (controller at the base, disks hidden in the wall). spacious with acceptable construction Superior Refrigeration
Cons
- There is no face dust filter and the rear fan is very loud.
Pros
- Price! The pricing is reasonable for such a great box. A solid piece of metal on a 4, even with a plus. There is the potential for the addition of three more turntables. In accordance with the norm, there are two USB 2.0 ports and one USB 3.0 port (which is more than plenty for use in the home). In addition, I would like to highlight the presence of a mount and sufficient space for cable management. On the legs are some anti-vibration foam disks that have been glued. Design that is straightforward and conventional, but with an appealing twist The parts have been assembled quite well. Additionally, these are dust filters, of course.
Cons
- I do not want to give the impression that these are drawbacks because, considering the cost, this is easily one of the most advantageous choices! The air does not flow directly through the front panel (the air intake is on the side). Although there is one turntable provided, I would prefer to have two (although I am willing to pay an additional 250–400 re). More reasonably priced selections, out of a total of 120.
Pros
- Sequins
Cons
- Expensive
Pros
- It's OK!
Cons
- Secret
Pros
- Sturdy construction
Cons
- There are some nuances
Pros
- Absolute Legend
Cons
- Weight
Pros
- Very impressive
Cons
- Long wait
Pros
- New
Cons
- Appearance
