🔧 Optimized Vixen Horns 3 Gallon (12 Liter) Tank System/Kit with 7 Ports, 200 PSI Gauge, Pressure Switch, Drain Valve, Safety Valve, Compression Fitting, Male Plug, Hose, Thread Sealant – VXT3000 Review

I'm really impressed with Vixen, I really thought they would send cheap parts with the tank. They actually give you the correct thread seal tape and washers/lock washers with bolts. I can't wait to install and use it! The only thing I can say is that they put all the brass parts in the box. I think that caused the dent.

Comes with quality fittings and everything you need to hook them up. I subtracted a star for ports that needed to be plugged in before I could use them. In addition, a connection fitting did not have the correct thread when it was first manufactured. This made it difficult to operate the crane manually. Although overall good. Looks good, quality hardware/fittings.

This tank is a simple air tank. It works, but be aware there will be metal shavings inside that you will want to shake out/clean. The plugs are welded on with a large edge, meaning the drain plug doesn't pull moisture from the bottom of the tank, it pulls 1/4 inch above the bottom (that's a lot of moisture in a 3 gallon tank you can). not easy to get out). The tank's legs are welded so that they can be bolted onto something, not underneath. If you plan to install it under your truck, you should

I bought this bottle because it came with the box. I was excited when I received the tank, but soon my excitement quickly turned terrifying. Let's start with the cons. There was a TON of rust on the inside of the tank and on the threads, then one of the threads was so bad it couldn't be more than the accessory! I had to twist and insert a larger screw to plug it. After this was fixed I pressed on the tank to check for leaks. When spraying, bubbles came out of the welds! The quality control at…