🖥️ VSDISPLAY 10.1" 10.1 Inch B101EW05/LP101WX1-SLP2 1280X800 LCD Screen with HD-MI LCD Controller Board VS-TY2660H-V1, Compatible with Raspberry Pi Review

I used this to create a simple test stand for computer components. Although the screen and components are a bit bulky, once installed in a small chassis, this is a much better solution than an old monitor. Most computers have an HDMI output, so that's not a problem, but I have adapters if needed. There weren't any dead pixels or color issues on the panel itself, it's not the best panel out there, but for a 1280 x 800 resolution at 10 inches, it's very comfortable for a small display! don't…

This kit contains ALMOST everything you need except a CR2025 battery for the remote control. I didn't have a CR2025 so I replaced the CR2032 which was a good fit. (The only difference between the two is the thickness and capacitance.) Everything worked fine - you just plug the control panel into the main LCD control board, connect the control board to the screen, and then over-feed the board's 12V power supply the 5.5mm x 2nd barrel jack 0.1mm. Connect an HDMI cable to your device to receive an

Good price for a screen of this size. It takes some cunning to be really useful. You'll have to come up with your own mounting hardware etc and make sure you don't short anything in the process, but still! If you're looking at this thing, you're probably ready to do it yourself, amirit? Lots of fun crafting and versatile.