📷 Wolfwhoop WT02: Ultra Micro AIO Camera and Video Transmitter for FPV Indoor Racing - HD 600TVL, 200mW, 5.8GHz Review

This is a great first fpv camera. It has a good 1/2 mile range with a single dipole receiver. So if you have a more powerful rig you will be impressed. Very small block, even suitable for UMX Radian. One problem is how hot it gets. It melts when working with hot glue, so we are currently looking for better ways to attach it.

Out of the box it worked well for a few minutes before losing signal while within 2ft of my glasses. The unit I received is almost certainly defective as the vtx gets so hot I almost burned my finger. I won't buy it again unless I return this one and buy the same model to make sure the original was just defective.

The goods arrived well packaged. The problem I have is that the camera and vtx are misaligned. You can also see that there is very little solder at the joints. I will put 2 parts together so I can use my fc osd so working with Lite Seer could be a blessing. It's basically tx02 with less quality. I haven't even plugged it in yet to see if the camera's quality is better or worse.

Good for the price but not for use in slow speed applications like RC trucks. Because of the power and size, it gets REALLY hot. gives off a slight odor when first used but disappeared after the electronics blew. There are no problems with it as it cools down, but picture quality and signal will start to degrade unless air is blown to cool it. You don't want to touch the camera when it's on because it's hot enough to burn you if you touch it.

Poor reception. Tested against my other 25Wh and was a lot less even if you think it says 25mw/200mw. The instructions don't tell you how to switch to 200mW, so you have to guess what is being switched. I tried several channels with the same result. The picture is normal for a small cheap camera, only the reception was very disappointing. Very bad publicity if it really is only 25 watt hours it seems. I will not buy again because I wanted 200Wh

4 stars due to heat. Do not attach with hot glue as it will melt. BUT, so far so good since I tied it to my custom frame. I fly around the back of my shop which is behind my house while sitting on the porch. . A few lines in the video but that's nothing compared to what I'm asking of you. It's very clear when you fly in front of me. The solid, low-profile antenna is great for emergency rollovers. I will buy it again without a doubt if I manage to break the first one.

Successfully connected to the video receiver, the frame rate is good, but the video color is not the best. The device gets very hot (enough to burn itself) when you turn it on and will likely need additional cooling. I noticed that the polarity on the connector is reversed compared to the mating connector on standard batteries (Elite and Nine eagles.walkera batteries work with no change as they don't use standard polarity). I haven't flown it yet, but I assume it works. Conclusion: It's worth…