This is easy to use what I don’t like is I use it on riding mower tires so I have to use separate gauge because it doesn’t register tire pressure below 20lbs
Pros
6-inch chrome plated dual head chuck
Cons
The product is not suitable for use on bicycles or motorcycles
I was filling my tire yesterday and the hose on this just opened up with no extra pressure applied. I was filling my tires at 35 psi which is pretty low. I've only used this tire inflator once a month (or less) for the last two years and have stored it in the garage, out of sunlight and weather, would not recommend.
Pros
Very good product. Would have been better if the air connection section could swivel.
Works as advertised.
I use it for my semi truck. I switched the chuck it came with for a 12 inch straight chuck I order off here and it works perfectly!
Pros
on our cars when I did a test it inflated's nice
Cons
Set tires to 40, and they measured 34 with 2 other gauges afterwards.
Works great and would purchase again in a heartbeat! I do wish numbers and marks were slightly bigger, but that’s nothing I didn’t know before purchasing.
Pros
Best tire filler I’ve had in a long time thank you it’s really well I appreciate it
The wynnsky heavy duty dual head tire inflator gauge with 12 inch air hose,tire pressure gauge with storage case.It works great for inflating any kind of tires like cars,motorcycles,bicycles and all kind of sports activities balls that are needed to be inflated.But the inflator air in pressure gauge reading never ever going to get the right air pump pressure reading for the things you’re inflating,must uses some common sense how much air are going into the things you’re inflating already.
Great product use daily in a semi truck shop. Only issue is it not being a high flow style, making airing up tires a little slow. Note I do only use this when checking tire pressure and toping of tires for drivers. Of course I have also swapped the end to have a clip on nozzle for valve stems. I've had mine for about 6 months I believe at this point , and it has held up perfectly mine is dirty for oil and grease but has no issues. It is a great tool, and priced well. Would work perfect for car…
Although this unit is easy to use, where you would read the psi numbers is like a guessing game you’ll get normal numbers then random lines in between. All 3 sides are the same. So if you need 35psi. You’ll have 30 - - - - 40- - - - 50 while being much smaller very close together then looking at it on a displayed photo.
Pros
This is the type of inflator with gauge you would see at the filling station
Has a special o-ring sealed tip on the hose. Didn't check valve end yet. Now I probably have to get a grease whip hose and new tire chuck to put a quick coupler on the end for various chucks. Hopefully the valve has 1/8 NPT, or custom hose building will be required. Now you know one of it's special features.
Pros
Great time saver wish I bought it years ago pumped up every tire in sight. And cost effective
My last tire pressure gauge broke, and I was thinking how great it would be to have an inflator with a gauge so I didn't have to go back and forth. I was thinking of the ones you see at the gas stations, but thought something like that would be too expensive. I was wrong. This inflator is exactly what I was looking for. It's built well, works perfectly. Tremendous value for the price.
Pros
Easy-to-read 20-120 psi tire pressure gauge, Standard 1/4 inch NPT female inlet
Cons
The gauge is not suitable for use in high humidity environments
The WYNNsky tire inflator arrived and it was simple to assemble. It does not come with the fitting for the air hose so I bought one for a buck at Lowes. I added white teflon tape to the threads and tightened them down. Fired it up and there were no leaks. The gauge appears to be accurate compared to my old one. I find the inflator to be very well constructed and feel it earns its "heavy duty" name. Looks just like the ones at the gas station in the good old days. I hope it lasts. It…
Not real accurate. It's off by at least 2 to 4 pounds. Also very hard to use on bike tires. It pushes the air valve on the tire in. But no problem on cars.
Pros
No issues. Reasonable price, workmanship and materials.
Cons
The product is not compatible with nitrogen-filled tires
Unfortunately the box it came in was broken, so storing it will not be able to be done in the case. Also, be sure you remember the connection nipple(husband's name. Same husband that for got to check to see if it was supposed to be included.)!
Pros
Hard to see numbers on scale .... Ease to use and extra caps and stems are a handy item !
You get what you pay for and in this case, I paid just enough to get what I need for home use - I have a compressor and my car tires need air about once every 4 months and this tool makes my life easier and makes me happy. I do not think it would stand up to life on the floor of a real shop but in my garage it gets treated pretty well and has been working fine.
This thing is awesome. Only complaint is that once it's assembled it no longer fits in the plastic box. Oh well, that's not really a big deal. There are a few reviews saying it's not accurate, but what I found is consistent with any air gauge I've ever used. You need to move things around before measuring the pressure. What I mean is that typically the mechanical parts inside will stick from not being used. Simply press the trigger once or twice and then you can use it reliably. Same thing at…
Pros
Easy to use. Much better than than the separate inflator and pressure gauge.
I got this for my father in-law, his eyes arnt as good as mine so i was hoping to take a black sharpie and mark the gauge where he would set his air pressure at. issue is i was thinking the gauge part was all brass and a black sharpie would show up nice but the brass part has a white background and black letters. the sharpie still might work and the gauge itself is really easy for me to read. i cant really knock it due to them making it a better gauge. one thing is it feels really different in…