- Quiet. It is controlled from the phone through the Mi Home application. When you select the region of the 2022 in the application, everything works without problems! There is a built-in humidity sensor. When the humidifier is turned on, it shows the same readings as a hygrometer located at a distance of 3 m. Further, of course, the built-in sensor shows a higher humidity, because. it should be higher next to the device. :) This is not a mistake, as many write.
- So-so moisturizes . Quickly increases moisture, but only around itself, like all ultrasonic models. And if you turn it on at the most maximum power, then its 4.5-liter tank is barely enough for half a day, and around it it will be wet on a chair or table (not to be confused with puddles, about which they write about other humidifiers). : after more than a month of use. All electrical wires, TV and laptop screen, Playstation, TV set-top box, sound equipment, mirror, etc. are covered with a white dust coating that cannot be removed with a vacuum cleaner with a furniture brush. Only with a damp cloth. This is a big minus of ultrasonic humidifiers. After such moisturizing, every black network or USB wire gets tired of wiping. Washing it is a separate "pleasure". From our "high-quality" water near Hong Kong, a rusty slimy coating is gradually formed. Quite a bit, because water began to be poured into it after filtering by reverse osmosis . But it will not work to wash off this mucus completely under running water. Needs to be wiped down with a rag. And crawling with a rag into the winding recesses of the lower unit of the humidifier is almost impossible. The distances between the walls are less than 1 cm, the depth is about 5 cm. The last time I cleaned everything with cotton swabs . In short, like in some Moskvich car, etc. Crap you crawl up to carry out maintenance. :)