Header banner
Revain logoHome Page

Reviews

Global ratings 77
  • 5
    41
  • 4
    25
  • 3
    5
  • 2
    4
  • 1
    2

Type of review

Revainrating 3 out of 5

Didn't quite buy it well, had a little trouble using it.

Approximately 5 years of experience. For all the time I had to sweat with this case. It is not very easy to disassemble - but after 2-3 times of complete parsing - it went easier. The front panel can be washed directly in water so that the foam rubber is not removed, because it is clamped by a bunch of iron clips, and if they are bent several times, they will break. The rail for additional cooling was not useful, especially since it was literally welded to the case from the very beginning and…

Pros
  • *People's brand. One of the most popular cases in the middle segment. * Spacious * 4 usable fans included (survivable) * Minimal simple cable management * There are dust filters * There is a window. * Bolts are unscrewed without a screwdriver. * Convenient installation of hard drives without bolts * There is a bay for SSD. * Comfortable and ergonomic front panel. Power button is cool * Looks decent * Well ventilated
Cons
  • *Very poor quality materials * The front bar (for additional cooling) had to be drilled out. The bolts were tightened with pre-rolled threads. * The bolts in the kit are of poor quality, many scroll. * It is extremely difficult to remove the cooler to clean it from dust - many bolts are stuck, many are scrolling. * The metal is not of the best quality, very thin and not reliable * Illumination of the front cooler is not needed, it is not visible. * The front USB panel broke after 2 years. it's stupidly recessed inside. Made in a very Chinese way. * Front USB ports all but USB3 are loose. flash drives wobble. USB 3 died completely - I had to buy separately and solder manually. * Dust nets are so-so - at the bottom it immediately bent and became unusable - I ordered an analog on alik, adjusted it. * Front and top dust foam rubber - not very convenient to maintain. * Behind the dies for the vidyuhi had to be broken out . * Very poor cable management. To make it beautiful (more or less) - it was possible, but the back cover of the spruce was closed ! Very tight wires under it . * There is only one SSD bay! At least 2 did! * The window is small - there is little sense in it.

Revainrating 5 out of 5

Just super, the product is made wonderfully, very satisfied.

I assembled a powerful config, in a moderately small case, and with good silent cooling. There are two fans with blue backlight for blowing in the front. They effectively blow through the case, the button for switching the rotation speed is on them. . the video card is hot, it overheated. 680GTX. I had to cut a window in the side wall and put another 12cm fan. The problem was solved. I got a beautiful, quiet, powerful system unit. Front zalman fans. Top and rear noctua. At night, the computer

Pros
  • The arrangement of all parts is thought out, there are many places for installing fans. Low price, nice looking.
Cons
  • The metal is thin, everything bends while I was collecting it, I was afraid to break it. The connectors on top are not very convenient in my opinion, small debris and dust get in.

Revainrating 4 out of 5

Everything is fine, there are only minor drawbacks.

Pros below: Style. Lots of case fans. Non-irritating backlight. transparent wall Different cons: The vacuum cleaner is still the same. It is not convenient to remove the front wall and top cover for dust cleaning. When buying cracked fans had to enclose something

Revainrating 5 out of 5

The quality is at the highest level, be sure to try it.

They write that the metal near the walls is thin, nothing like that. standard thickness, does not bend, no complaints at all. throughout the body, where there are ventilation. holes, filters are inserted, or something else that prevents dust from entering the iron components. I stood without cover during the repair, I thought that I would find deposits of sand and dust inside the coach, but no, nothing got inside except ordinary fine household dust , the filters in front of the fans took the…

Pros
  • Size, appearance, engineering approach, attention to detail, front panel interfaces, fans
Cons
  • power button. a feeling that she will soon sink and kirdyk

Revainrating 5 out of 5

The quality exceeds all expectations, I recommend to buy.

Bought to replace the typical "office worker". The quality is excellent - yes, it's not 2.5 cm of steel, but not bad either. For fine-leaved people will do. Competent logistics and plenty of space inside - enough for a Zalman CNPS10x Performa cooler and an Asus GeForce 750 Ti OC video. There are 4 fans built into the case (2 on top, front, with a nice blue backlight, and rear). All work quietly, do not buzz. The case itself, even in the presence of many potential buzzers, does not make noise or

Pros
  • - Price - Build quality - Internal logistics - The presence of many built-in fans from Zalman - Sled for HDD - Pretty good material - Window
Cons
  • I don't watch

Revainrating 2 out of 5

Product is not reliable, not worth buying.

Even during the assembly process, I managed to remember a couple of affectionate engineers who placed technological holes inside the case, but in general, nothing critical. During the installation of the side panels, their "legs" were bent, with which they are attached to the body itself, although everything was removed and installed as carefully as possible. I could not remove the top panel at all, no matter how hard I tried - I wanted to rearrange one of the fans to the front panel. On the…

Pros
  • -Looks good from a distance -4 fans included -Fan control button - reobas at minimum
Cons
  • - Noisy fans - Removable plastic panels front and top - Thin and soft, like plasticine, metal side panels -Reobas manages only two turntables, although initially there are already four of them.

Revainrating 5 out of 5

Just super, the product is made wonderfully, very satisfied.

Pros: 1. There are 4 coolers in the base, which are quite enough even for an average gaming computer. 2. eye-pleasing backlight, neat appearance. 3. Space Cons below: 1. Thin iron (like all blocks of the middle price range) 2. The system with breaking out the straps for cards (like any normal person broke the wrong one at first)

Revainrating 4 out of 5

What you need, a cool purchase, I advise you.

Good, small and ventilated case at a low price. I have been using for more than 1.5 years in the configuration: *Asrock B150m *i5-6600 with Cooler Master Hyper 212, which draws air from the front side, thus ventilating the entire case. * GTX 1070 with RGB backlight, which is VERY tight to the HDD cage. To remove the vidyakha and unhook the tongue of the PCI-E holder, you will have to twist the processor heatsink) *2 hdd and 1 SSD The coolers are moderately noisy/quiet, I turn them on only in…

Pros
  • purged Nice appearance Price quality PSU bottom Presence of glass
Cons
  • Poor glossy front panel with flimsy USB and sound. ports. Scratched and dirty glass. Terribly inconvenient HDD connection. The coolers are very simple, moderately noisy/quiet. Can be combined into one circuit, but there is no on / off button, only two speeds on the reobas. cramped Thin metal - but do not knock on it with a hammer)

Revainrating 5 out of 5

Wonderful quality, one hundred percent satisfied!

In general, the case has enough space to accommodate, probably, absolutely any variants of systems up to ATX inclusive. For fans of quiet systems, I recommend replacing the pre-installed coolers with quiet models, the data does not create much noise. But you can live with it if you do not need a completely silent system. This is the best budget case I have ever dealt with, and the selection is quite large. I think this case is the best in the price category up to 5k.

Pros
  • -Presence of 4 pre-installed case fans for 120; -Ability to install 1 more case fan, total 5 coolers for 120; -Excellent circulation of the intrahull space; -The presence of a platform, near the USB on the top panel, under the device, you can charge your headphones or phone with a short cable, or put a portable drive. -Built-in reobas that works in two positions; - Lower location of the PSU, in a box isolated from other components; - The presence of a mesh filter at the inlet window for air intake of the power supply unit (I constantly remove felt boots from there); -High quality body paint; -Possibility of installation of overall processor cooling system; -Ability to install 2 liquid cooling systems (1 on the front panel, 2 on the top); -The presence of a window (disputable advantage).
Cons
  • -The front fan shines with a blue LED backlight, I don't need it; - On the right side wall, the indentation for cable management could be more (when installing a non-modular PSU, there may be problems with efficient cable routing); -Not the most convenient cable management; -Thin metal (but for such a price I consider it senseless to demand more).

Revainrating 1 out of 5

The product is terrible, much below my expectations.

I broke off specifically with this case . Video cards R9 290 are not included, the mother of ASUS Maximus IV Extreme did not enter, at least throw it in the trash . It was not used for a minute. Wishing to eat? I will give without looking, we will agree on a price. Pros: 1. Quality of metal processing (plating) 2. Good ventilation (only it was not possible to use it, see below) With its cons: 1. Flimsy . iron like foil, on all the cases that I had and that I saw, you can safely sit down…

Revainrating 5 out of 5

One of the best deals, glad I bought this.

Its pros: heavy, hard, there is a reobas and a cooler, there is a place for mod dvd Has cons: 10 minutes I could not figure out how to install the ssd, at first it smells like plastic.

Revainrating 4 out of 5

Good product, not disappointed.

Has some pros: The number of complete fans, build quality, reobas (two-position), support for a video card. Cons: Thin metal, support for a video card is suitable for overall video cards, it makes no sense.

Revainrating 4 out of 5

Good product, I recommend that you try it.

Despite the disadvantages, compared to the AeroCool VS-1 bath, hard drives have cooled down by 10-15 degrees. Since the warmer the air, the lighter it is, put hot 7200 rpm hard drives in the upper slots, put cold 5400 rpm in the lower slots, My temperatures: 1) Toshiba x300 4tb - 27 degrees 2) there is a gap 3) Toshiba x300 4tb - 30 degrees 4) Vd ezrz 4 tb - 23 degrees Has pros: - The cheapest case with good airflow and a basket for 4 hard drives - Convenient installation of hard drives, the…

Revainrating 5 out of 5

Feel free to buy, for such a price, the quality is simply amazing.

The assembly of the computer in this case took a very long time - 2.5 hours. This is because it is very cramped, and the wires run behind the back wall. Now I would think about buying a bigger case, but what's done is done. I don't particularly regret it. Looks very cool on the outside. There are USB ports on the case. Hard drives are easy to mount, there are special sleds. though I did not immediately understand that they need to be placed with ports to the back wall and all the wires are…

Pros
  • Great design, looks really cool! Probably the best case for the price. A huge plus is that it is well ventilated by four fans at once, besides, they are quite quiet. There is an air filter in front of the fans, which is also good. There are many different screws in the kit, and they remain in abundance even after assembling the computer. There is a backlight for the front fan (blue). You can put a long video card, but the motherboard itself fits in with great difficulty.
Cons
  • The body is very tight. Immediately upon assembly, an acute shortage of space begins to be felt. Honestly, outwardly it looks exactly the same size as my old InWin, but inside, due to the location of the drive bays and the power supply, there is really little space. It is not clear why a bar across the body is needed, it is very flimsy, it does not move to the right and left. I tried to fix the video card with it, so it began to touch the mount with a cooler, I had to abandon this idea. I did not like that to free up space for the video card, you need to break out the rear bars. All wires need to be led to the disks and the motherboard from the back side, and there is very little space there. Anti-vibration and noise-absorbing stands are actually just plastic, they do not dampen or absorb anything. The metal is quite thin, but not critical.

Revainrating 3 out of 5

Completely standard product, nothing remarkable.

Many recommended this brand to me, the case is made of the cheapest materials, the whole case is very substandard, after inserting the power supply and ATX motherboard, there is practically no room for the second lower video card, plus it clings to all the lower cables. I also bought a power supply of the same brand, quite expensive, and the fan began to rattle after a year. The main thing in a year is not to wash the dust from the front of the case, even after completely disassembling it. I…

Pros
  • 4 free fans
Cons
  • Very cramped, made of cheap materials, collects dust and dirt.

Revainrating 5 out of 5

A very high-quality product, I take it not for the first time.

I placed all the wires behind the back cover, no need to save on the block, buy a power supply with removable connectors . nothing sags anywhere. Motherboard ASUS PRIME Z270-A, got up with a bang. Vidyuha PowerColor Radeon R9 390 (290mm and there is still plenty of room for 350 or even 400) stood up with a bang and fixed the holder. The Thermalright Macho B&W Edition MACHO-A-BW cooler is placed back to back (160mm), when the lid is closed, its fan touches the plexiglass. It's easier to…

Pros
  • Price quality size, I recommend even for assembling a top-end computer.
Cons
  • More for CD memory cards

Revainrating 5 out of 5

Perfect purchase for me, exactly what I was looking for!

The characteristics say: "weight 6 kg", something seems to me that this is not so, my old case without all the iron is heavier . The case has walls quite thick, not thin, you can’t poke or leave a dent with your finger (like 0.5 mm) . All sharp edges are bent, no cuts. I liked everything, except for the firebox cooler, not only is it connected via a molex, but it also glows. And so the case has good ventilation and, what's funny, it's quiet. I also read that I will reboot it by mistake, nope…

Pros
  • 1 - price! For such little money, we get a very high-quality case, with fairly thick walls 2 - 4 coolers are included, two on top, one on the front side, the other on the back. 3 - all sharp corners, the edges are bent, and when assembling the PC, it is impossible to cut yourself or damage the wires 4 - the lower location of the power supply, with the possibility of installing the cooler of the block in such a way that the air was taken from the environment, and not from the case. The legs are high and do not interfere with air intake 5 - the presence of a rebass, you can connect 2 coolers to it, 3 pins each. The rebass itself connects to the molex 6 - ease of removal of the top and front panels, there are dust filters. When cleaning, it is very simple and quick to remove them and vacuum them.
Cons
  • They are here, but forgive them. For the price is not very high, and the case is of high quality. 1 - mounting hard drives, the drives here are mounted on plastic "sleds, guides" and without them it is impossible to install HD 3.5. I honestly don’t understand why this is, wouldn’t it be easier to make a regular mount, like everywhere else? Hard with screws, but for some reason my noisy hard drive works quietly and there are no vibrations, the hard drive is fastened with one self-tapping screw, and the self-tapping screw itself is in a plastic slide 2 - a standard cooler with LED lighting on the front wall. Why? It does not look there at all, so this cooler is also connected via a molex. In general, I advise everyone to buy 2 coolers to the case in order to put airflow on the railway and replace it with a controlled cooler, a lighthouse (see that the motherboard can connect 5 coolers to itself, the rebass allows only 2 to take for seed) 3 - all the bolts, cogs, etc. They come in one package, and you guess where the screw is a or b. It seems that everything is drawn, but without selection in any way. Although this is probably the case everywhere because of the price 4 - the power supply, if it looks down with the cooler, there is no adequate dust filter, just some kind of mesh with holes 5 - the most insignificant minus: breaking off slots for pci.