Similar products
How to set the time on a Casio AE1200 watch?
Setting the time on the Casio AE1200 watch is easy once you know the steps. Here is a guide to walk you through the process:
Enter Time Setting Mode
- Press the Mode button repeatedly until you enter the Timekeeping Mode (indicated by 'TIME' on the display).
- Pull out the crown to position 2.
Set the Time
- Press A to reset seconds to 00.
- Press D to change the hour.
- Press B to change the minutes.
- Press C to switch between 12 and 24 hour format.
Exit Time Setting Mode
- Push the crown back into position 1 to start the seconds counting again.
That's it! You have now successfully set the time on your Casio AE1200 watch. Some tips to remember:
- The watch runs on a 12 or 24 hour format.
- When setting the hour in 12 hour format, ensure AM/PM is set correctly.
- For precise time, set the minutes a few minutes ahead and press A at the desired start time.
Following these simple steps will ensure your Casio AE1200 watch always displays the correct time.
How to change the battery in a Casio AE1200 watch?
The battery in the Casio AE1200 typically lasts around 3-5 years before needing a replacement. Replacing it is a straightforward process if you follow these steps:
Materials Needed
- Small Phillips screwdriver
- Replacement battery (CR2016)
- Tweezers
Steps
- Unscrew the 4 screws on the back of the watch case using a Phillips screwdriver.
- Carefully remove the back cover.
- Use tweezers to slide out the old battery from the holder.
- Insert the new CR2016 battery with the + side facing up.
- Press the battery down firmly into the holder.
- Replace the back cover and screw the 4 screws back in place.
- Reset the time and calendar settings if needed.
Here are some tips when changing the Casio AE1200 battery:
- Buy only authentic Casio CR2016 batteries.
- Avoid touching the new battery directly with fingers.
- Dispose of the old battery properly by recycling it.
- Use a soft cloth between the screwdriver and watch to avoid scratches.
- Ensure the back cover is sealed tightly to maintain water resistance.
By following this straightforward process, you can easily replace the battery yourself and keep your Casio AE1200 running for years to come.
How to adjust the band size of a Casio AE1200 watch?
The resin band on the Casio AE1200 watch can be easily adjusted to fit your wrist perfectly. Here is a step-by-step guide:
Materials Needed
- Small screwdriver
- Spring bar tool (or paperclip)
Another interesting products
Steps
- Turn the watch over and locate the spring bar holes on the lugs.
- Insert a spring bar tool (or bent paperclip) into the hole and gently apply pressure until the spring bar releases.
- Slide the band out and remove it from the lug.
- To remove links for a smaller size, use a screwdriver to push the pins out of the band link that needs removal.
- To extend the band, re-insert the spring bar into the lug holes and slide in more links.
- Insert the spring bar back into the lug and gently press until it clicks securely into place.
- Repeat the steps to adjust the other side of the band.
Tips for adjusting the Casio AE1200 watch band:
- Remove links evenly on both sides for balance.
- The band should be snug but not overly tight on your wrist.
- Wear the watch higher up your arm for a proper fit.
- Take it to a jeweler if you have trouble with the spring bars.
Adjusting the band is an easy way to ensure your Casio AE1200 watch fits comfortably on your wrist. With some simple tools and these steps, you can resize it yourself in just a few minutes.
How to use the stopwatch feature on a Casio AE1200 watch?
The Casio AE1200 has a handy stopwatch feature that allows you to easily time events down to the 100th of a second. Here is how you can use it:
Access the Stopwatch Mode
- Press the Mode button repeatedly to cycle through the modes until you reach the Stopwatch mode (indicated by 'STW' on the display).
Use the Stopwatch
- Press D to start the stopwatch.
- Press D again to stop the stopwatch.
- Press A to reset the stopwatch to zero.
- Press B to measure split times - the watch will display the split time for a few seconds before continuing the overall time.
| Button | Function |
|---|---|
| D | Start / Stop |
| A | Reset |
| B | Split / Split release |
The stopwatch can time up to 23 hours, 59 minutes and 59.99 seconds. It's useful for timing sports, events, cooking and more.
Some tips for using the stopwatch:
- Press firmly for proper button contact.
- Keep the watch flat and facing upwards for best results.
- The stopwatch will keep timing even if you exit the mode.
- Zero it out after use by pressing A.
With simple start/stop/reset functions, the AE1200 stopwatch is easy to operate and handy for timing anything down to the hundredth of a second.
How To Set The Time On Casio Men's AE1200WHB-1BV Black Resin Watch?
How To Set The Alarm On Casio Men's AE1200WHB-1BV Black Resin Watch?
To set the alarm on Casio Men's AE1200WHB-1BV Black Resin Watch, follow these steps:
- Press the mode button until the alarm mode is displayed on the screen.
- Press and hold the adjust button until the hour setting of the alarm time starts to flash.
- Use the light or search button to set the hour value.
- Press the mode button again to set the minute value.
- Use the light or search button to set the minute value.
- Press the adjust button to save the settings.
Note that the alarm can be set in the current time zone that the watch is set to.
