🕰️ Clock Hardware

5 Review

🔧 Hardware, 🕰️ Clock Hardware

Total Shaft Length: 5/8 In, Thread Length: 5/16 In, Please According to Picture 4 to Choose the Right Size. PACKAGED WITH CARE: Comes as two clock movements with 4 pack hands kit in a presentation box with custom foam inserts to protect all from scratching, bending, and other damage while shipping. CHOOSE THE SUITABLE MECHANISM: this kit fit clock dials…

5 Review

🔧 Hardware, 🕰️ Clock Hardware

Total Shaft Length: 5/8 In, Thread Length: 5/16 In, Please According to Picture 4 to Choose the Right Size. CHOOSE THE SUITABLE MECHANISM: the threaded length is 5/16 in, fit clock dials up to 1/8 in thick and perfect for clock hands under 8 1/4 in long, making you smile of the memories your old clock gives you. PACKAGED WITH CARE: Comes as a clock…

4 Review

🔧 Hardware, 🕰️ Clock Hardware

Applicable to cross-stitch,three-dimensional embroidery,craft clock,frameless draw clock,etc.INSTRUCTIONS - Included along with the movements. Youngtown manufactures the 12888 series in various models,they have different shaft lengths and shaft diameters.Makesure the existing shaft and threads before ordering and you will get the right replacement…

4 Review

🔧 Hardware, 🕰️ Clock Hardware

“CE” & ”RoHS” Approved Clock Movement. The total length of the shaft of our “Push-On” movement is 1/2in, with a thread length of 1/5in that allows a clock face to be 1/8in (3mm) thick. The clock hands are good for a clock dial diameter more than 2 3/4in (7cm). Recommended clock hand size for the movement is no more than 7 7/8in (20cm). We provide many…

4 Review

🔧 Hardware, 🕰️ Clock Hardware

THESE KEYS ARE COME WITH CASE COVER AS SHOWN IN PICTURES. These keys come with total 10 prongs (Each Key with 5 prong), so this is best item as master key for all your clock. hese two keys are solution for you. Most of all winding clock keys available in these 10 prongs. The numbers of key are starting from 2 to 11. Some extra larges key holes are not…

4 Review

🔧 Hardware, 🕰️ Clock Hardware

Measurement: hand length: total hour hand length: approx. 172 mm (6.8 inches); Total minute hand length: approx. 207 mm (8.1 inches); Second caps: approx. 7 mm (0.3 inch). Size: total shaft length is 15 mm (3/ 5 inch), thread length is 6.7 mm (7/ 25 inch); Jump second movement, suitable for 1 - 4 mm (1/ 24 - 4/ 25 inch) thickness clock panel. Wide…

4 Review

🔧 Hardware, 🕰️ Clock Hardware

2 Pair Clock Hands With One Short Second Hand Clock Movement (Upgrade). DIY Clock Kit: Ornate set with 2 pairs of different style clock hands for your options, create your own DIY craft clock, minimalist wall clock as a gift, frameless theme clock, and family photo wall clock. Fit Clock over 20 in Diameter: The hour hand of tyle1 is approx. 7.1 in…

4 Review

🔧 Hardware, 🕰️ Clock Hardware

“CE” & ”RoHS” Approved Clock Movement. The total length of the shaft of our “Push-On” movement is approx. 7/10in (17.5mm), with a thread length of 2/5in (10.5mm) that allows a clock face up to 3/10in (7.5 mm) thick. The clock hands are good for a clock dial diameter more than 7 1/11in (18cm). Recommended clock hand size for the movement is no more 7…

4 Review

🔧 Hardware, 🕰️ Clock Hardware

Grandfather Clock Door Key Set of 2 in Brass Finish for Howard Miller. These 2 keys will fit Howard Miller and other clock companies. Grandfather and grandmother clocks. Key is 2 3/8". in Length. Shaft is 1 1/2". Flag is 3/8. Keys are in a Brass finish.

4 Review

🔧 Hardware, 🕰️ Clock Hardware

.

4 Review

🔧 Hardware, 🕰️ Clock Hardware

Plastic frame. High torque clock movement with metal hook: I shaft, drive long clock hands (10 mm to 450 mm), with 230 mm/ 9.1 inch long hand to fit dials up to 56 cm/ 22 inches in diameter. Clock mechanism size: total shaft length is 31 mm (1-1/ 5 inch), thread length is 24.6 mm (24/ 25 inches); Jump second movement, suitable for 16 - 21 mm (5/ 8 - 4/…

4 Review

🔧 Hardware, 🕰️ Clock Hardware

Complete kit with mounting hardware, and wall hanger. Select your hands from the pictures on the left. Made In The U.S.A. This movement comes with a 1 year guarantee. Please contact Orange County Clocks directly for any installation questions/warranty issues.

4 Review

🔧 Hardware, 🕰️ Clock Hardware

5 Pack of movements and hands is great for clock makers. Hands are suitable for a 14-16 inch clock diameter, and possibly other sizes. Check hand measurements listed below and decide if it fits your clock design!. Hour Hand: Full length: 4-3/4 inches, Minute Hand: Full length 7-1/2 inches. Second hand: Full length 6-1/2 inches and from center to end…

4 Review

🔧 Hardware, 🕰️ Clock Hardware

Howard Miller 354473 / Kieninger QPA12 Battery quartz movement, pendulum type. Uses 2 C batteries to operate. Batteries are NOT included. This is a direct replacement for the Hermle 2214 and 2215 models which are no longer in production. This is the stronger coil version of the 2214/2215 replacement movement. It has a high output coil for use with the…

4 Review

🔧 Hardware, 🕰️ Clock Hardware

Clock quartz movements: high torque jump second movement, suitable for 9 - 13 mm (9/ 25 - 1/ 2 inches) thickness clock panel. Movement size: shaft length is 23 mm (9/ 10 inches), thread length is 15.4 mm (3/ 5 inches). Center of hole hand size: hour hand is approx. 170 mm (6.7 inch); Minute hand is approx. 243 mm (9.6 inch); Second caps is approx. 7 mm…

4 Review

🔧 Hardware, 🕰️ Clock Hardware

Quartz Clock Movement Kit: This clock mechanism is perfect with its clock parts for repairing, replacing, or making your own DIY clock project. The clock movement design keeps foreign matter out of the gears, resulting in years of trouble-free operation. Clock Movement Measurements: Total hand shaft length is 22.2 mm (7/8 inch). Total shaft diameter is 7…

4 Review

🔧 Hardware, 🕰️ Clock Hardware

Package includes: you will get 3 clock movements, 3 sets of accessories, 3 wall clock hooks, 3 wall nails and 6 sets of different pointer kits, you can choose various styles according to your needs; The replacement parts are suitable for maintenance, you can also change or make your own clocks; Please note that the back is silver, and the front is as…

4 Review

🔧 Hardware, 🕰️ Clock Hardware

✔️ High torque movement: long spindle quartz clock replacement movement parts with metal hook and 3 different pairs of hands(2 black and 1 gold), good for repairing, replacing or make your own customized clock project by yourself. The simple style clock movement can match to diverse colors, patterns, shapes clock panel, it will not stand out, good…

4 Review

🔧 Hardware, 🕰️ Clock Hardware

✔️ High torque movement: long spindle quartz clock replacement movement parts with metal hook and 4 different pairs of hands(3 long and 1 short hands), good for repairing, replacing or make your own customized clock project by yourself. The simple style clock movement can match to diverse colors, patterns, shapes clock panel, it will not stand out, good…

4 Review

🔧 Hardware, 🕰️ Clock Hardware

Please know: this extra large hands for takane I shaft high torque clock movement; Hour hands, mounting hole size is 4.98 mm; Minute hands, mounting hole size is approx.: 4.0 x 2.8 mm (L x W). Please check carefully the holes of the hands are not round. Size from the center of the hole to the tip: the hour hand is approx. 203 mm/ 8.0 inches long; The…