๐ ๏ธ Engine Tools
2 Review
Suitable for Generation IV&V V8 Engines. Providing ports to attach oil pressure tester. Dual port for bottom or side tester connection. EN-47971 is installed in place of the spin-on oil filter, and allows existing oil pressure gauge to be attached for engine oil system diagnosis. Package Include: 1pcs Oil Pressure Gauge Adapter.
2 Review
๐ต[Compatible With] : Engine cam gear lock timing belt installation tool fits for Honda and Acura models featuring Vtec B-series motors including fits for Civic and Integra (all years). ๐ต[Perfect Design] : This precision tool makes the job of replacing or setting up your new timing belt as easy as 1,2,3.It's designed for B16a & B18c Variants. Simply setโฆ
Read more about this product
2 Review
Professional Tool: Universal Overhead Valve Spring Compressor is a great option for compressing valve springs - facilitating valve spring removal or valve stem seal replacement on many Cars, Vans, & Light Trucks. Unique Design: Features two different length jaws grips that easily attach to the valve spring for a secure hold on the part; Allows you toโฆ
Read more about this product
2 Review
Application: This FreeTec Pipe Cutter Tool can be used for cut pipes and tubes from 3/4 inch to 3 inches /19 to 76 mm in diameter, and can be operated with one hand, easy to use. Suitable For: This Exhaust Pipe Cutter have a wild use for different material pipe, it suits for wild steel, galvanised steel, copper and aluminium pipes. Easy To Use: Firstlyโฆ
Read more about this product
2 Review
For camshaft adjuster-pre-tensioning, camshaft locking and removal/installation of timing chain(s) align camshafts in a correct position. Created from rugged drop forged construction and heat treated to withstand difficult and rugged jobs, long lasting and reliable tool. Applicable to Audi A4 A6 A8 3.2L V6 FSI and VW Quattro 2.4L(see more details below)โฆ
Read more about this product
2 Review
Work on Duramax 2500 / 3500 pickups .Remove metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel. Locking the flywheel at the transmission instead of having to remove the starter for water pump replacement. Toothed pieces withโฆ
Read more about this product
2 Review
Practical: This Camshaft Alignment Timing Tool Kit works for vehicle models: Mini Cooper Mini One/ HB Cooper/ Cooper/ Cooper S, Citoen C4/ C4 Picasso, Peugeot 207/ 207CC/ 308 & Engine types: N12/N14 (1.4L / 1.6L VTI - Turbo), EP3(8FS), EP6(5FW), EP6C, 1.6THP, EP6DT(5FX), EP6DTS(5FY). Fitment: Models Years โ Mini One Coupe R56 (2006-2010), Mini Cooperโฆ
Read more about this product
2 Review
OEM replacement for Cummins 3164660 Rear Crankshaft Oil Seal Remover and Installer Tool. Designed for Cummins 4BT 3.9L, B Series 5.9L, ISB 5.9L 6.7L and QSB 5.9L 6.7L years 1989-2016, also Paccar engines PX-6. Used to remove and install seals without a wear sleeve such as 5259499, 3934486 and 3926126. This tool will not remove. There is no tool toโฆ
Read more about this product
2 Review
Aligns the front and rear timing chain/crank seal cover. Fits GM 4.8L, 5.3L, 5.7L, 6.0L engines, 1996-Present. Similar to J-41476.
2 Review
CONTROL ARM BUSHING TOOL: The upper control arm bushing press kit easily replaces press-in type upper control arm bushings on many rear-wheel-drive vehicles; Upper control arm bushing tool for use with Chrysler, Ford, and GM vehicles. NON-DAMAGING CONTROL ARM TOOL: Our upper control arm bushing puller kit quickly removes or installs control arm bushingsโฆ
Read more about this product
2 Review
TUNE-UP TIME: Does your engine feel unstable or have weak acceleration? Then it's time for a tune-up. Roll up your sleeves and use this OMT tool set to hold your vehicle's timing system at top dead center while you check, fix, and replace other components. PREMIUM MATERIAL: OMT engine tool parts are made with heat-treated 45# steel for maximal strengthโฆ
Read more about this product
2 Review
ใApplicationใThis tool has a wide range of applications,It can be used to replace the timing belt, replace the cam seal, remove the cam gear, install the camshaft pulley and so on. It is also suitable for diesel fuel injection pump or water pump. ใFit forใSuitable for most models, all models have sprocket holes larger than 12 mm (1 / 2 ") and holeโฆ
Read more about this product
2 Review
Engine turning/rotating tool works on Caterpillar 3200/3406 Series C13/C15/C16/3208/3400/3406e/3508/3512/3500 EUI/MUI engines and Mack E-7,E-7 ETEC engine. Injector height guage tool kit fit Caterpiller 3406E, C-15 and C-16. Great tool set makes adjusting injectors and valve lash easier on Caterpiller 3406E, C-15 and C-16. Can adjust the injector heightโฆ
Read more about this product
2 Review
Product Type:Steering Wheel. Item Package Dimension:13.462 cm L X13.462 cm W X1.777 cm H. Item Paackage Weight:0.4 lbs. Country Of Origin: China.
2 Review
300 foot wireless range to scan trucks anywhere on facility grounds. Scan trucks and perform initial diagnosis before you bring them into the shop. One wireless VCI for all your diagnostic software. Eliminate cables and cable replacement costs. RP1210 compatible and will work with any RP1210 VCI.
2 Review
Helps to identify engine and chassis noise. Powered by a 9V battery (not supplied). Complete with headphones, volume control and 180mm probe. CE certificated. Simple and easy to use.
2 Review
The turbo timing tool kit is compatible with Cruze 1.4 (2011-),Aveo1.2 1.4 (2011-),Orlando 1.4 (2012-),Adam 1.2 1.4 (2012- ), Ampera 1.4 (2011- ),Astra-J 1.4 (2009),Corsa-D 1.0 1.2 1.4 (2009-),Cascada 1.4 (2013-),Insignia 1.4 (2011-), Meriva-B 1.4 (2010-),Mokka 1.4 (2012-), Zafira-C Tourer 1.4 (2011-). Profession cam timing tool fits for checking andโฆ
Read more about this product
2 Review
ใDIVERSIFICATION OF USEใ--AutoWanderer Tool valve spring compressor tool kit is specially designed to help REMOVE AND COMPRESS VALVE SPRING CONVENIENT. It can be used not only with the engine head still on the engine and in the car, but also with the engine head removed. The tool holds the bolt on the engine head while the lever rotates around the baseโฆ
Read more about this product
2 Review
The cylinder head service tool set is for installation and removal of the valve spring, without removal of cylinder head from the engine. The tool slides along the discharge shaft to more quickly disassemble and compress the valve spring of the vehicle. Tool bolts to the head while the lever pivots from the base to compress the spring. Knurled ends onโฆ
Read more about this product
2 Review
Application Engine: This kit include timing tool and camshaft sliding pieces spacer tool, Fit 2006-2018 EA888 1.8 2.0 TSi TFSi engine. With 2 of the large part T40191/2 spacer and 3 of the smaller part T40191/1 spacer. Engine Code : BYT, BZB, CABA, CABB, CABD, CADA, CAEA, CAEB, CAWA, CAWB, CBFA, CCTA, CCZA, CCZB, CCZC, CDAA, CDAB, CDHA, CDHB, CDNB, CDNCโฆ
Read more about this product