🔧 Fittings

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

12 inch Size is for DIAMETER, NOT FOR circumference. ---SIZE IS FOR DIAMETER, NOT FOR circumference. 304 STAINLESS STEEL HOSE CLAMP- The whole large duct clamp (including the band, housing and screw) are all made of premium 304 stainless steel. Durable, strong and rust resistant. FLEXIBLE ADJUSTABLE SIZE RANGE- FLEXIBLE ADJUSTABLE SIZE RANGE- Flexible…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Lifetime cycle tested at U.S. Testing laboratories to withstand 10,000 shock cycles. Factory tested to withstand 500,000 cycles without failure (654-c tested). Hydra-Rester male sweat fittings are compatible with press-fitting systems, such as viega process and all push-fitting systems. Allows for installation in 2 × 4 wall cavity. Certified by the…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Package quantity: 3 packs water tank float valves, which aim to reduce the time spent on filling and checking the water tank, sealing effect and high pressure; Using a smaller float control device, which can withstand greater fluid pressure. Adjustable arm: the micro float valve has an adjustable arm which is made of sturdy ABS, rugged and durable…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Maximum service temperature 180°F. Polyvinyl chloride (PVC) is the most frequently specified of all thermoplastic materials because of its light weight, durability and cost-effectiveness.

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Shut-Off Chrome Brass Angle Pex Stop Valve for Faucets and Toilets. Pack of 10 Pcs Pex Angle Stop Water shut off ball Valves. EZ-Fluid Angle Stop Valve 1/2 Pex x 3/8" Comp. The Installation require the Plumbing Pex tool that can Crimping the S.S Crimp Ring. 1/4-turn On/off valve operation means only a quarter-turn of the handle, it often used as Faucet…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Forged tee with three openings for connecting and branching three pipes with different ends. Branch and one run has female National Pipe Taper (NPT) threads and one run has male NPT threads for connecting different types of pipes. Made from brass for higher corrosion resistance than steel. Operating temperatures range from -53 to 121 degrees C (-65 to…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Package quantity: 3 packs water tank float valves, which aim to reduce the time spent on filling and checking the water tank, sealing effect and high pressure; Using a smaller float control device, which can withstand greater fluid pressure. Adjustable arm: the micro float valve has an adjustable arm which is made of sturdy ABS, rugged and durable…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Reducing adapter allows for connecting and extending different size pipes or fittings, can be used with grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections as well as air tools. 1/8" Male National Pipe Taper (NPT) threads on one end and 1/4" female NPT threads on the…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

XFITTING HOT AND COLD PEX BALL VALVE Compatible with all types and brands of PEX Tubing - Watts, Everhot, Viega, Zurn, Nibco, Bow, etc. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution. Designed for hydronic heating as well as potable water distribution. 400 PSI. Approved to…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Red Plastic-covered lever handle for on/off manual control. The outside thread with sealant for better sealing. Easy Installation in tight working spaces. It comes with 1 year warranty.

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

【Model】Rotary Lever Hand Valve HV-02. 【Size】 Air Inlet (P)=1/4”NPT,Air Outlet(A B)=1/4”NPT,Air Exhaust(R S)=1/4”NPT. 【Pressure range】25-116Psi【Working temperature range】32~140°F. 【Type】3 Position 4 Way. ✔We provide matching fittings,You can connect directly to your 1/4 "or 6mm tube.

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Product Type:Auto Accessory. Item Package Weight:0.023 Kilograms. Item Package Dimension:2.54 cm L X7.62 cm W X11.43 cm H. Country Of Origin: Chile.

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Pipe ID - 1.5" (38mm). Pipe OD - 1.90" (48mm). Holesaw size: 2.5" (63mm). Up to 3/8" Wall Thickness. (9mm). Made in the USA.

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

DECORATIVE 1/2 INCH FLOOR FLANGES: Our newly designed PIPE DÉCOR floor flanges are the perfect choice for all of your DIY design needs. These flanges have the same industrial look and feel as traditional plumbing flanges but were designed with decorative applications in mind. They are slightly smaller and lighter than authentic industrial flanges, but…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Package Contain : 20pcs Furniture Cam Fittings. Material : Zinc alloy, chrome plated; Color : Silver Tone. Overall Height(Approx) : 10mm / 0.39 inch; Inner Height(Approx) : 3mm / 0.12 inch. Top Diameter(Approx) : 12mm / 0.47 inch; Bottom Diameter(Approx) : 11mm / 0.43 inch. This Cam Fittings usage in various types of furniture, cabinet or others of all…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

utah pneumatic: push to connect air Pressure Range: 0-1 Mpa145 psi Max pressure:1.5 Mpa/ 217 psi/15 bar Temperature Range 0-60°C | 32~140°F Applicable Tube: PU/NYLON/Soft PE hose fitting air bag fittings pushlock air fittings. plastic fittings for tubing Easy to install This tube connector is available in various styles and models . Each model to serve…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Heavy wall bulkhead is molded of highest impact resistant PVC eliminating possibility of finding hidden cracks when filling aquarium. Stock color is jet black to match acrylic tank backgrounds. All kits contain: bulkhead fitting, gasket, lock nut. 1/2-Inch Standard Threaded x Slip Bulkhead.

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

90-degree elbow for connecting two pipes or fittings at an angle. Slip openings for connecting to male unthreaded pipes or fitting. PVC for corrosion resistance, high strength, and less weight than fittings made from metal. Smooth interior finish for reduced friction and material buildup. Meets specifications ASTM D2466 and D1784 for quality assurance.

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Wye with three openings for connecting and branching three pipes. Hub ends for connecting to male unthreaded pipes or fittings. PVC-DWV for corrosion resistance, high strength, and less weight than fittings made from metal. Smooth interior finish for reduced friction and material buildup.Lead Free. Meets specifications ASTM D2665 and D3311 for quality…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Coupling for connecting two pipes with the same diameter in a straight run. Female National Pipe Taper (NPT) threads for connecting to male threaded pipes. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F). Meets specifications ASTM…