🚰 Hydraulics, Pneumatics & Plumbing
3 Review
Adapter for connecting a hose to a hose. Temperatures range from -40 to 160 F. Connections: Hose Barb x Hose Barb. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
3 Review
1/4" ISO Body Size, 3/8" SAE Thread, Poppet Valve. Most common couplers used in the agriculture, construction and logging industries. Harden Steel with 5100 PSI Rating. 6.34 GPM Max Flow. Interchangeable with all ISO 5675 series including ball seat valve, poppet seal, push-pull couplings.
3 Review
Flexible Coupling Compatible with cast iron, , copper, lead, and steel piping. Flexible Connectors are Leak-Proof, Rot-Proof and Sealed Against Infiltration and Exfiltration. May be used for non-pressure drain, waste, and vent (DWV) piping systems and sewer systems indoors and outdoors. Conforms to ASTM C1173, CSA B602, Certified and UPC Approved, Rated…
Read more about this product
3 Review
For use across a wide temperature range from -30 degrees F to 250 degrees F, Good/Excellent resistance to many petroleum oils/greases, hydraulic fluids, alcohol, mineral oil and grease. Oil resistant applications of all types. Low temperature military uses. Off-road equipment. Automotive, marine, aircraft fuel systems. 70 Durometer. Compatible with…
Read more about this product
3 Review
5 Pieces. Durable Borosilicate Glass. 10mm OD, 1.5mm thick wall. Any broken during shipping just email us, we will replace you a new one. We are a manufacturer and we accept custom and wholesale orders. If you are interested, please feel free to contact us.
3 Review
Heavy duty hose is 20 percent thicker than standard drinking water hoses. Drinking water safe, lead free, BPA free, phthalate free and leaves no strong plastic taste in your drinking water. Machined fittings and strain relief ends for added durability. UV stabilized for longer life and made with nsf certified hose. Compliant with all federal and state…
Read more about this product
3 Review
1-3/8" (6-Spline). 5/8" pump shaft I.D. Die cast material. 540 RPM. Works with 6500 series Hypro Roller Pumps.
3 Review
3 Pressure Gauges of 63mm Diameter: 10 Mpa/100 Bar/1400 PSI, 25 Mpa/250 Bar/3500 PSI, 40 Mpa/400 Bar/5000 PSI. Advanced silicone oil, WON'T turn to yellow. And better shock resistance, higher precision. 7 couplings attached, sturdy case, 1 Gas Hose. Max working pressure: 40 Mpa/400 Bar/5000 PSI. 2 years warranty.
3 Review
4 Pieces Push-Fit Ball Valve in Size 3/4 Inch 2 Pieces Cold,2 Pieces Hot With a Disconnect Clip Tool. Potable Water and Hydronic Applications Connects PEX, CPVC and Copper Pipe. No Lead DZR Forged Brass. Quick Installation without Tool. O-Ring for Leak Free Seals.
3 Review
Body & Ball Type:Full Port, Low Operation Torque,Temp Range:-60F to 450F. The valve is fitted with PTFE seals for maximizing corrosion resistance and lifespan of the ball valve. This ball valve is made of Stainless Steel 316 and has a plastic-covered lever handle for on/off manual control. Nominal Working Pressure:1000 WOG:Max 1000 psi for Water, Oil…
Read more about this product
3 Review
Commonly used in water towers, water inlet and outlet and self-made water storage barrels, which can be used for various pipes, faucets, hoses, fittings, etc. Made with high quality brass. Durable, the internal and external thread are smooth. Easy to use. Note: These connectors contain lead, not for potable water. Comes with 2 gaskets, embeded gasket…
Read more about this product
3 Review
Thread Size : 1/4" NPT Male. Made from brass for strength. Male National Pipe Taper (NPT) threads for use with female threaded pipes. It is a gold tone outer Hex Head Pipe Connector that is for closing and terminating the end of a pipe. Great for blocking off intake manifold water ports, water pump ports, water temp and oil sender holes, engine block.
3 Review
Connection Bore Diameter: 6mm to 8mm; Total Size: 22x14mm/0.86''x0.55''(LxD). Top tight type rigid coupling,high torque with rigidity, low inertia and excellent sensitivity. No rotation gap, elastic action can make up for symmetrical angular misalignment, maintenance-free, oil proof and corrosion resistance. NOTE: The rigid type basically does not allow…
Read more about this product
3 Review
Sterling Seal & Supply 7530 is the most chemically inert of all plastics which complies with USFDA legislation for safe use with food and is one of the most versatile plastics known to man. Sterling Seal & Supply 7530 has excellent thermal insulation and electrical reliability. This is true at high radio frequencies, making it suitable for use as an…
Read more about this product
3 Review
Superior construction – inner tubing is polyamide with polyurethane sheathing, reinforced diagonally in highly tear resistant polyester. Hose has an inner diameter of 0.16" (4.1 mm) & an outer diameter of 0.425" (10.8 mm); Large inner diameter makes them ideal for use in cold weather. Heavy duty zinc plated end connections crimped to the hose. Rolled…
Read more about this product
3 Review
Hex bushing for connecting two pipes with different diameters. 3/8" Male NPT threads on one end and 1/4" female NPT threads on the other for connecting pipes with different ends. Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded. Operating pressure of our…
Read more about this product
3 Review
The band and housing are stainless steel and the screws are zinc plated carbon steel with 5/16" Hex Heads. Simple screw tightening method creates a strong clamp force that will not shake loose. Good for many applications such as bundling or sealing air and fluid hose lines. Adjusts from 1/4-in up to 5/8-in. The recommended installation screw torque is 30…
Read more about this product
3 Review
Each set has one male dust cap and one female dust cap. Keep your couplers clean to reduce dirt and debris and protect them from the elements. Most common size for skid steer loaders and attachments. For ISO 1/2 Body Flat Face Couplers: Female Diameter: 1.50”, Male Diameter: 0.96”.
3 Review
1:Thread connect to breaker is M10*1. 2:Suit popular majority brand. 3:Gas Charging or Gas Pressure Test. 4:Easy to USE. 5: Compact box case, Easy to carry.
3 Review
SECURITY: unites 2 shorter lengths of same O. D. piping with a secure, leak –free compression joint. VERSATILE: works great with ice makers, faucets, dishwashers, washing machines, etc. FAST AND EASY: features a super easy DIY solution for water line extension. BONUS: brass packing nut included. QUALITY: heavy duty DZR lead free forged brass construction…
Read more about this product