How to take underwater photos with a GoPro?
Taking stunning underwater photos with a GoPro camera is easy with the right accessories and a few tips.
Get a waterproof housing
To take a GoPro underwater, you need a waterproof housing or case. GoPro makes different housings for various depths. For example:
- The Super Suit housing is waterproof up to 196 feet (60m)
- The Dive Housing is waterproof up to 197 feet (60m)
Third party housings like the FitStill are also available for shallower depths.
Use waterproof accessories
To mount your GoPro and control it underwater, you need waterproof accessories like:
- A floating handle grip
- Head and body straps
- Adhesive mounts
This allows you to get creative with your underwater shooting angles.
Set up the right settings
Use these camera settings for best underwater photos:
- Sharpness - High
- Color - GoPro Color
- RAW - Off (to conserve space)
Also, clean the lens thoroughly before diving in to prevent spots and smudges.
How to record underwater videos with a GoPro?
Recording underwater videos with your GoPro opens up a whole new world of creative shots. Here are some tips for capturing stunning underwater footage.
Choose the right waterproof housing
GoPro makes different housings for various depths:
| Housing | Max Depth |
|---|---|
| Super Suit | 196 feet (60m) |
| Dive Housing | 197 feet (60m) |
Third party housings like the FitStill work for shallower depths.
Top products in 📸 Underwater Photography
Use appropriate mounts
To capture smooth video while swimming or surfing, use flexible mounts like:
- Head straps
- Body straps
- Chest harnesses
For scuba diving, handheld grips work well.
Set optimal settings
Use these settings for best underwater videos:
- Resolution - 4K at 30fps
- Field of View - Wide
- Low Light - On
- Stabilization - On
Also, use flat color profile for better post processing.
How to use a GoPro for scuba diving?
GoPro cameras are perfect for capturing incredible footage while scuba diving. Here's how to use a GoPro to document your underwater adventures.
Get a proper dive housing
You'll need a waterproof dive housing capable of going to your max depth. GoPro makes two options:
- Super Suit - 196 feet (60m)
- Dive Housing - 197 feet (60m)
Make sure the housing is properly sealed before diving in.
Use appropriate mounts
Handheld mounts give you the most flexibility:
- GoPro Floaty Handle Grip
- GoPole Scuba Edition
You can also mount on your mask, helmet, or dive gear.
Set up your camera
Use these settings:
- Resolution - 4K at 60fps
- FOV - Wide
- Protune - On (for color correction)
- RAW Audio - Off (to exclude breathing sounds)
Make sure to thoroughly clean the lens beforehand. Bring extra batteries and memory cards.
Stay safe
Don't let fiddling with your GoPro distract you from safe diving practices. Prioritize safety first.
How to mount a GoPro on a surfboard for surfing videos?
Mounting your GoPro on your surfboard allows you to capture sweet point-of-view shots while surfing. Here are some tips for getting great surf footage.
Choose the right mount
GoPro makes a few mounts designed for surfboards:
- The Surfboard Mounts attach via a rubber pad or suction cup
- The Removable Instrument Mount uses a fin key to attach to a FCS fin box
Place the mount towards the nose or middle of your board for the best view.
Angle it correctly
Angle your GoPro to best capture your stance while riding the waves:
- Frontside - Angle it backwards to show your face and the wave
- Backside - Angle it forwards to show the wave first
Pointing it straight down shows your board movements.
Use tethers securely
Attach your GoPro to the mount using tethers or adhesive mounts as a safety backup. This prevents loss if the mount comes off.
Maximize stability
For smooth video, be sure to:
- Set the GoPro to high resolution and 60fps
- Enable stabilization
- Use a floating handle for extra stability
With the right angle and settings, you'll score awesome surf footage!
How to prevent leaks when using a GoPro underwater housing?
A leak in your GoPro's underwater housing can ruin your camera. Here are some tips to help prevent leaks:
Inspect the seals
Before each use, thoroughly inspect the rubber seals for any wear, tear, cracks, or debris. Look closely at the seam between the seal and the plastic housing.
Proper sealing technique
- Make sure the seal is evenly seated in the groove
- Remove any hair, sand, or other particles from the seal area
- Grease the seals with non-petroleum based lubricant
- Press the backdoor evenly and firmly until it clicks all the way around
Perform water test
Do a quick water test without the camera inside to check for leaks:
- Seal the empty housing
- Submerge in water for a few minutes
- Inspect for any water droplets inside
Proper housing maintenance
- Rinse with fresh water after each use in saltwater
- Allow to air dry fully before storage
- Store in a cool, dry place out of direct sunlight
Following these best practices for your GoPro's underwater housing helps ensure watertight protection for your camera.
Another interesting products
How to change batteries while using a waterproof GoPro case?
Changing batteries while your GoPro is in a waterproof housing may seem daunting, but follows a simple process if done properly.
Required materials
- Spare batteries
- Silica gel packet
- Waterproof lube
Step-by-step process
- Surface and find a dry environment
- Thoroughly dry the housing and your hands
- Twist the backdoor open counter-clockwise
- Remove old battery and insert new one
- Seal the used battery in a ziplock bag
- Wipe any moisture from the gasket area
- Apply waterproof lube around the backdoor gasket
- Close the backdoor and lock it clockwise while pressing hard on the door
- Test housing for leaks before going underwater again
Tips
- Bring more than enough spare batteries
- Have backup camera in case of housing failure
- Practice battery swaps on land first
With the right preparation and care, you can change GoPro batteries quickly to maximize shooting time underwater.
How to get an Amazon Prime subscription for a profit
Amazon Prime is a popular membership program that offers free shipping, streaming media, and other benefits. While a Prime subscription costs $139 per year, there are some creative ways to get it for free or even at a profit:
Use a household account
Amazon Household allows two adults and up to four teens and children to share Prime benefits. By sharing the costs with others, each member pays just $35 per year. You can add someoneoutside your household too.
Rotate memberships
You can rotate who pays for Prime between friends or family members each year. One person signs up for the year, reaps the 2-day shipping savings, then cancels and passes the torch. This works well for trustworthy groups who frequently order online.
Take advantage of promotions
Amazon sometimes offers free 1-month Prime trials. Sign up with alternate emails when available. Student Prime is half-off at $59 per year. Bundling Prime with Amazon Visa Cards or services like Audible can also unlock deals.
Share the benefits
Share your Prime shipping benefits with friends or family for a small fee. Let them ship items to you for free 2-day delivery, then forward the packages to them. Charge a packing and handling fee on each box.
Profit from rewards
The Amazon Prime Rewards Visa Card offers 5% back on Amazon purchases. Earning rewards essentially offsets the $139 annual fee. Also take advantage of Prime exclusive deals, Prime Day sales, and Prime Video rentals.
With the right techniques, you can maximize the value from Amazon Prime beyond just the membership cost.
How To Choose The Right Size Of Fitstill Waterproof Housing For Your HERO4, HERO3+ & HERO3 Camera?
Choosing the right size of FitStill Waterproof Housing for your HERO4, HERO3+ & HERO3 camera is crucial to ensure that your camera fits perfectly and is protected from water damage. Here are some tips to help you choose the right size:
What Are The Differences Between Fitstill Waterproof Housing For HERO4, HERO3+ & HERO3 Camera?
FitStill Waterproof Housing is a great accessory for HERO4, HERO3+ & HERO3 cameras that allows you to take your camera underwater and capture amazing photos and videos. Here are some differences between FitStill Waterproof Housing for HERO4, HERO3+ & HERO3 camera:
Overall, FitStill Waterproof Housing is a great accessory for HERO4, HERO3+ & HERO3 cameras that allows you to take your camera underwater and capture amazing photos and videos.
What Are The Features Of Fitstill Waterproof Housing For HERO4, HERO3+ & HERO3 Camera?
FitStill Waterproof Housing for HERO4, HERO3+ & HERO3 camera has several features that make it a great accessory for underwater photography. Here are some of the features:
Overall, FitStill Waterproof Housing for HERO4, HERO3+ & HERO3 camera is a great accessory for underwater photography that provides water resistance, clear design, and additional accessories to enhance your photography experience.
Similar products
9 Review
