Review on High-Quality CESS RCA Plug Solder 🔌 Gold Audio Video Cable Connector (10 Pack) by Julio Solano

These are nice RCA plugs. If you succeeded in the soldering process, you should be happy with it.1. The central pin is a soldered cup. Outside of ETMS, I've never seen anyone with the proper tool for soldering wires to solder cups. Google "Pace TW-15" if interested. Since the cup is not the smallest, but only one, you can get by with a very steady hand and the right soldering iron - a narrow chisel tip on a roughly 60-watt thermostatic iron. A low wattage iron will need to be left on longer than a thermostatted iron, increasing the likelihood of melting plastic before the cup is hot enough to melt the solder. A strong solid iron can work if you are REALLY fast.2. I wish you the best of luck using lead free solder. You must connect without destroying the connector.3. The blades from the batch I received were too narrow for the jack. Bend them carefully and a little if you did too; You don't have to bother so much to connect it.4. These plugs have a metallic outer shell and do not discharge any voltage. Consider adding strain relief/insulation depending on what you're soldering to it (e.g. speaker wire). I used heat shrink tubing for that little extra piece of mind. I suspect most one star reviews are due to users without the right experience, gear or plumb.