Review on 🌟 Effortless Organization: Easy Track RA1204-CH 12 Inch Sliding Wardrobe Closet Organizer Rod with Chrome Finish - Includes Installation Hardware by Joyce Cain

I bought one of these over ten years ago and have been using it ever since. I decided I wanted to put another one on the other side of the closet so we could both use the utility rod at the same time. After a long search I finally found this one. The Valet stem feels feather light for its size, but while it's anything like our other, it's built like a tank. The one I received came with 2 short screws like you screw into existing shelf adjustment holes in units like ClosetMaid (which we have), as well as 4 self tapping screws perfect for attaching the servant rod without punching it . other side of the closet. I used a 1/8" drill bit to pre-drill the holes before driving the screws in, and I advise anyone using self-tapping screws to do the same. The drill did not drill too deep into the body. In the end, leave enough drill bit to cover about 3/4 the length of the screw. This way he has enough power without splitting the body. Unlike the other one I tried, Revain returned which was just a U-Port with a shaft inserted into a plastic sleeve.) This cylinder is fully enclosed. stretches to a decent usable length. I measured 10.75 inches just past the end of the ball along the stem to the bracket when fully extended. Enough to hold some shirts, pants or whatever. I've had 3 full suits with garment bags hanging from another servant rod with no holding or strength issues. Do yourself a favor and grab this rod instead of the others. My experience in finding a good one was that a lot of them were very cheap and they only lengthened about 5 inches which is a joke.