Review on 🔧 ABN 3-Piece Gear Puller Set – 3-inch, 4-inch, and 6-inch Removal Tool Kit for Sliding Gears, Pulleys, and Flywheels by Manuel Gfx

This is a very useful set of three grip pullers. Each puller has two grip positions, which allows the puller screw to be positioned as close as possible to the center shaft it is pulling against. The jaws can be adjusted to grip the outside of the rim or between the spokes to grip the inside of the rim. The price is very low for this puller set. The user should be aware that the short screws holding the jaws should be hand tightened only and that a pair of washers, a short length of pipe or a suitably sized socket should be placed on the shaft where the puller screw is located to be attached to be attached. and dressed. After applying pressure, lightly tap the head of the bolt with a hammer to loosen the clamped hub, gear, pulley, etc. from the shaft.