Review on Headphones monitor wireless Audio-Technica ATH-M50xBT2 by Rimba

* Do not squeeze the bass. It's not bad: there is no sagging or flattening of low and mid frequencies - but if you want a rich deep sound from bass to vibration in the body - this is not about them. * Pause/Play: When you press the pause/resume button on the headphones themselves, the headphones will play an audio notification about this. And if you can still put up with the notification itself, then you need to be prepared for the fact that while it is being played, audio playback has already resumed - that is, about a second of sound is eaten up. It is inconvenient if you listen to something informational. You have to either rewind, or pause from your phone / computer, or calculate the time to pause. * LED indicator: When the headphones are turned on and paired with a Bluetooth device, the LED flashes every 4 seconds. It is completely invisible while it is light, or there is light from the screen - but in the dark, lying / sitting, especially in light-colored clothes - it starts to annoy quite strongly. I would prefer that the indication was only charging, since the audio indication is enough. I had to glue mine. * The voice assistant call button is located above the volume up button. It has a different relief, but in the beginning, you can try to press it instead of the volume * I would say that the device reprogramming tool is missing (I would disable the voice assistant call button or change its purpose and disable the LED flashing during operation)