Review on Smart watch Garmin Instinct, tundra by Gabriela Sujak (Gabr

Since in 2-3 weeks on hikes it happens that the memory is almost completely clogged (sometimes 2-3 megabytes), I had to install firmware version 10.0 myself, where they finally made it possible to delete 1.7 MB of language files from the watch. Almost 30 language files are always in memory - I don't know a single person to whom this would be relevant. If there is any other firmware, then at the first synchronization all deleted files are restored. After removing the excess "garbage", 7.22 MB out of 7.87 MB are free, which is very pleasing. It's just great, in 2022, to count every kilobyte and pray that a new firmware does not arrive (it will lie in the clock, but will not install itself). In the Garmin Explore software, you can pre-load maps of the desired region and track all your routes, you can create new ones and delete old ones, and all this is immediately synchronized with your watch. BUT! The route must not contain more than 50 waypoints or there may be problems. My route for 14 km was displayed, but it gave a warning according to the number of points and after five minutes the clock simply rebooted - although I had not even pressed "Start" yet. The routes themselves do not take up much space in the watch's memory, I got 40 kb for a 14 km journey. I have classes for 8-10 hours - the clock is pulling, without refueling, although they are already a little over a year and a half. And never connect more than one watch to PC when ating. I had the 235th and instincts on charge, I ated the target on the site, after which I clicked "Synchronization" in the Express. Garmin Express ditched the 235's firmware and ated the Instinct parameters. At the same time, the 235s are activated in another account and are not added to this Express - it simply sees them in the system (like a flash drive) and for some reason ates them too. Soft Garmin has always been legendary for glitches.