Review on 🔌 Cmple Voltage Mounting Bracket: Versatile Multipurpose Solution for Enhanced SEO by Marcus Cano

You should remove the pictures of the orange bracket because this bracket will not be shipped to you and the orange bracket is very different from the previous black bracket. I have installed several different brands over the years and they are by far the worst I have ever used. 8 inches all over, so better cut the hole perfectly or just a little smaller. After seeing how small the flange was, I made myself a cardboard template. 2) The metal used for the screws is EXTREMELY SOFT. I have a screwdriver that fits the screws perfectly, but the heads still warp when I try to turn them. I ended up having to use a vice (i.e. pliers) on the head of the screws to get them to screw in the locking tabs. I had to back off the screws a few times until they were light enough for the screwdriver to actually work in the soft heads. 3) If you try to easily install the bracket before the screws come loose, you're done. Break the locking tab on the back of the shackle. 4) Be careful, the plastic under the screw heads is very thin. So if you press too hard to prevent the screwdriver from falling out of the screws, you will damage the bracket. 5) The threaded holes for mounting the cover are unthreaded. Ordinary screws that come with a bezel are not self-tapping screws, so you can form threads in plastic. I realize this has probably become standard practice, but it was still poorly implemented. The plain and simple black brackets they will send you aren't even worth a dollar.