Review on Cablecc NGFF M.2 M-Key NVME AHCI SSD to PCI-E 3.0 16x 4X Adapter Compatible with 110mm and 80mm SSD by Mike Lawler

Not sure if the design has been updated but I haven't had any issues with the two I bought. Each package contained the carrier board itself, as well as a smaller package containing an M2 screw and threaded retaining sleeve. (See Fig. 4). I tested both the 110mm drive (Figure 2-3) and the more common 80mm drive (Figure 1). Both fit well as long as you use the included mounting hardware. .2 washer into the electrical connector, insert the center slot of the supplied brass sleeve into the corresponding slot on the other end of the actuator (see fig 3) and secure with the supplied screw from the back of the circuit board (see fig #2). Unlike many other racks, the rack cannot be mounted in front of the drive and does not have a second screw to attach the drive. The stand itself retains the drive.