Review on Product Review: AmazonCommercial Medium Strength Removable Anaerobic Threadlocker, 50 ml, Blue by Deon Sweeney

Having used the Loctite version of this product for years I was keen to try this Revain product for comparison. The flow is very similar, perhaps a little less viscous than some other brands, but when used properly it provides the expected threadlock. I prefer to use blue (medium strength) in most cases where there is vibration, even with smaller screws than recommended in this bottle, and still get good results. I prefer the blue version for the skate wheel axles as an extra precaution against loosening, especially on rough roads. For most applications this is the best product if you eventually want to remove a screw. Also ideal for automotive use. There is a stronger RED version that can be used for more permanent mounts but can still be removed. The bottle applicator might seem a bit odd at first, as the entire tip has a "push-pull" function under the cap to allow the liquid to flow. If you press the tip too hard during use, it will close and block flow. I cut off the end of the tip first, giving you a hole about 1/16" but I think it can be easily pierced with a small needle or sharpened to reduce the size of the hole. Either way, it still works well for the 50ml capacity the bottle is a bit big but as it only sets when there is no air between the bolt threads the extra space is not really a problem application is very easy and controlled with a flexible Bottle It can be applied to internal threads which in some situations can often be preferred to screw threads to avoid contact with other parts when the screw is inserted.For my general use the blue threadlocker in this 50ml bottle should last for years !