Review on 3D Printer Creality Ender 3 Pro Black by Adam Kowalski ᠌

There is a table curvature from the center to the edges of about 0.1 mm (which is sensitive for a 3D printer). The kit includes a flexible mat, to which the material sticks well, but due to its flexibility, it repeats the curvature of the table. I took Ultrabase glass on Alik specifically for Ender 3, now (03/07/2022) it costs about 1300. I also took a table calibration sensor, an analogue of BLTouch, now it costs about 900. After that, I began to print wide models without problems with the curvature of the table. Glass must be thoroughly washed with a dishwasher before each print so that there is no grease from fingers on the working surface, otherwise the material will not stick to the glass. I do not use additional adhesives, it sticks even without them. After the glass has cooled down, the model will peel off easily. Also, if you install a calibration sensor, you will need to configure and reload the firmware, which will require a programmer, it costs 200, a lot of technical mindset and search on Google and YouTube, in the latter, before buying 3D printers, I recommend that you familiarize yourself with the channels "Dmitry Sorkin" and " Sergey Irbis"