Review on 🎮 ASUS Tuf Gaming Plus X570 AM4 ATX DDR4-SDRAM Motherboard by Akihiko Kichiro ᠌

Considering that the mother is not cheap, it is logical that cases will be taken with good cooling. But ASUS suggests that we buy separate devil-splitters for air cooling systems, so get 3 connectors for valves. Well at least they are 4pin. But the strangest solution is the active cooling of the chipset! Moreover, it is implemented in the entire 570th line. What can I say: the cooler on the motherboard is audible, and you can’t adjust the speed in bios (it can be added in the firmware), it spins from 2200 to 2800 rpm. AIDA and HWmonitor show the temperature on this chipset crookedly, for me it is static, around 60 degrees, sometimes it changes to 66-67. Those. there is no certainty that the information from the sensor is accurate. The fan itself is surrounded by a plastic (!) casing, which is not clear what kind of load it carries on the entire structure. And the coolest thing is that the chipset stands exactly opposite the pci-e 4.0 port, and when you install a video card, its hot heatsink hangs right over the chipset cooler - literally a couple of millimeters, as a result, the motherboard cooler sucks hot air from the video card. If you have a small case that does not ventilate well, this can be a problem. It happened to me when I put it in the old building - if you close all the walls tightly, then the real one starts inside (only 1 vent for blowing and 1 for air intake). With the purchase of a new case, the temperature inside the box has become much lower, even under load, all components operate at low, comfortable, average temperatures. In general, I chose for a long time, I wanted to change after the purchase, but decided to leave it.