Review on 🔧 Crescent 1/2-Inch Drive 12-Point Standard Metric Socket - 19mm (Model: CDS79N) by Joe Michels

I knew this wasn't an impact wrench head but thought it would last long enough to remove two bolts from my control arm. I used my 24v cobalt and removed the first screw. It took about 20 seconds to let go. The second bolt on the other arm was tighter. I banged on it for about 30 seconds and suddenly the base started spinning, so I assumed the bolt had come loose. So I held out for another 5-7 seconds. Pulled out the driver and the entire interior of the jack is exposed and mostly smooth. If you don't use an impact wrench that's probably fine, it's a heavy head. But if you use Impact, do it for Impact.