Review on 🚗 Jeep Grand Cherokee Passenger Side Tail Light Assembly - TYC 11-5275-90 Replacement by Will Powers

Ordered on Sunday and arrived Tuesday afternoon with free shipping (5-8 days). It fits well and is well packaged. The odd thing was that there was no invoice or installation instructions in the package (although I didn't need them). Came with built-in bulbs. A few tips for installation. You will need to slide the red tab with a small flat blade (screwdriver) to disconnect the connector plug from the old tail light. Insert the connector into the new tail light and push back the red sliding connector with your fingers. The red connector holds the connector in place. On my 2002 Cherokee I had to remove the plastic hinge bracket (with 2 mounting screws) from the old tail light and put in the new one. I used the same screwdriver to slide and pull the edges of the plastic bracket to loosen it and put it back in the opposite way to fit the new tail light. I was then unable to secure the top original screw in the hole because the metal clip was set about 1/8 further back than the original taillight. I had to use a longer 1/4" screw on the top and was able to use the original screw on the bottom. Everything else was perfect. All the brake lights, turn signals, headlights and various combinations worked as intended (and most people know that Jeep lighting design has problems I wasn't planning to buy a jeep tail light. The job took longer due to replacing the hinged piece of plastic that holds the light on the back and finding a longer screw. All in all it took about 15 minutes. That Light looks the same and fits in the same area.