The pressure switch is in one piece. It is well made, metal contacts and on/off switch and 3 ports. The accessories he brought are what he lacks. If you are unfamiliar with pneumatic or mechanical equipment, this may not be for you! The kit included a lot of accessories, 2 pressure gauges, a regulator/manifold (cheap), a safety/relief valve (not sure about its quality) and a set of fittings. You can use all of these parts as shown, but I prefer a more customized and compact setup that is stronger and won't break from impact. Of course, as I said, if you're replacing something like a mechanical one, you'll need to buy additional parts to make it work. Not the fault of the manufacturer or the parts; There are just a lot of configurations that are 100% correct out of the box. I first had to switch from spade connectors to ring connectors on my wires to make the electrical connections. I used my old single port regulator/manifold, my old relief/bleed valve, the new gauges that came with the switch kit, and various fittings. (Lots of trips to multiple shops). A NOTICE. Due to dimensional changes (hose lengths) it may be necessary to replace the black air line from the tank to the pressure switch. This is a 1/4" air brake hose from an auto parts store. (You won't find it at a major hardware store; the plastic tubing there doesn't hold pressure and doesn't take heat.) Finally, instructions for adjusting the on/off pressure are included in the cover of the switch. They are true and they work. Think about it and be patient, it may take a few tries but you will get there (see video). Overall I am very satisfied, the switch works great, that first photo is my old switch, second is a fresh install.
Linkstyle Universal Socket Wrench Set, 7Mm-19Mm Multi-Function Repair Kit With Drill Adapter Ratchet Gadget, Grip Hand Tools Gifts For Men Dad Husband Boyfriend DIY Handyman (4PCS)
44 Review
Circular saw Makita 5008MG, 1800 W blue/silver
68 Review
2Pack 6000MAh Li-Ion Replacement Battery For Dewalt 18V XRP Ni-Cad DC9096 DW9098 DE9503
42 Review
Set Of 2 VARSK Contour Gauges With Light (5" And 10"), Wide Shape Duplicator Profile Tool For Accurate Measuring Of Corners, Woodworking Templates, Tiles, And Laminate
45 Review
Wostore 180 Degree Tubing Bender For 1/4 5/16 And 3/8Inch Copper Aluminum Thin Stainless Steel Blue
24 Review
Fiskars X25 Splitting Axe: 28-Inch Length for Superior Splitting Power
20 Review
Sharpen Your Tools With HTS 101I0 6Pc 180Mm / 40-600 Grit Diamond Flat File Set
28 Review
140Mm/150 Grit Diamond Needle File Set - 10 Piece HTS 101E0
30 Review